Siemens 6AV7812-0BC10-1AB0 SIMATIC Panel PC 877 Panel PC

Description

The Siemens 6AV7812-0BC10-1AB0 is a SIMATIC Panel PC 877 designed for industrial human-machine interface (HMI) applications. This unit features a 15-inch touchscreen display with a 1024 x 768 resolution, providing a clear and interactive operator interface. It is powered by a Pentium 4 Mobile 2.2 GHz processor and comes equipped with 512 MB of DDR266 SDRAM and a 40 GByte EIDE hard drive. A front-side USB port allows for convenient connection of peripherals. The system is pre-loaded with the Windows 2000 Professional Multi-User Interface (MUI) operating system. Note that this product is considered obsolete by the manufacturer.

Features

• 15-inch color touchscreen display
• 1024 x 768 pixel native resolution
• Integrated Pentium 4 Mobile 2.2 GHz processor
• 512 MB DDR266 SDRAM for application processing
• 40 GByte EIDE 3.5-inch hard disk drive for storage
• Built-in DVD-ROM drive
• Convenient front-panel USB interface
• Pre-installed Windows 2000 Professional (MUI)

Applications

• Machine-level operator control and monitoring
• Process visualization and data acquisition
• Industrial control room HMI stations
• Factory automation and plant floor interfaces

Technical Specifications

Installation Guidelines

1. 1 Verify that the panel cutout dimensions match the unit's specifications for a secure and proper fit. Ensure the mounting surface is flat and clean.
2. 2 Confirm the control cabinet is fully de-energized and locked out. Use a multimeter to verify zero-energy state at the intended power connection points.
3. 3 Insert the Panel PC into the cutout from the front of the panel. Install and tighten all mounting clamps evenly around the bezel to the manufacturer's recommended torque to ensure a proper seal.
4. 4 Connect the Protective Earth (PE) conductor to the designated terminal on the unit chassis. This connection is critical for safety and must be made first.
5. 5 Connect the AC power supply cable to the unit's power input connector. Ensure the source voltage matches the 110-230V AC rating.
6. 6 Connect any required peripherals, such as keyboards or memory devices, to the available USB and communication ports.
7. 7 After closing the cabinet and removing the lockout/tagout device, re-apply power to the system and verify that the Panel PC boots correctly.