ABB 3BSE013064R1 PU516 Advant OCS PU516 Engineering Board -PCI

Description

The 3BSE013064R1 is an industrial PC-based interface board developed by ABB to function as an engineering communication node within the Advant OCS architecture. Operating under the type designation PU516, this board bridges system configurations by establishing critical link capabilities directly through a standard 5V, 32-bit, 33MHz PCI bus slot. The 3BSE013064R1 is configured with an integrated hardware interface consisting of one MB300 communication port and one RS-232 serial port, enabling simultaneous high-speed peer-to-peer subsystem linking and localized serial maintenance diagnostics. Equipped with 16 megabytes of onboard memory, the PU516 processor card offloads deterministic data traffic from the host platform, ensuring the stable synchronization required for engineering stations, control networks, and Master software configurations.

Features

• Built with 16Mbyte of dedicated onboard memory for real-time buffering and data throughput.
• Features dual-interface connectivity providing one MB300 port and one RS-232 port.
• Designed to interface with standard 5V, 32-bit, 33MHz PCI bus architectures.
• Facilitates specialized station link integration within Advant OCS with Master SW platforms.

Applications

• Advant Station 100 Engineering Board systems utilizing PCI-based communication modules.
• Distributed Control Systems (DCS) requiring localized RS-232 engineering access and MB300 data tracking.
• Industrial workstation expansions executing real-time control logic orchestration and programming updates.

Technical Specifications

Connections/Interfaces

Installation Guidelines

PCI Slot Placement

Turn off all primary power sources supplying the engineering station or host enclosure before opening the assembly. Put on a calibrated anti-static wrist strap connected to a verified ground point. Insert the PU516 board straight down into the designated 5V 32-bit PCI slot until the edge connector makes full contact with the bus terminal, then secure the metal bracket screw.

Shielding and Interference Protection

Use fully shielded cabling for both the MB300 and the RS-232 communication lines. Ground the cable shields explicitly at the designated enclosure entry point to prevent environmental electrical noise from corrupting data registers or disrupting the underlying real-time PCI bus communication timings.

Thermal Management

Verify that internal cabinet ventilation routing matches factory specifications. Leave clear airway paths around the 3BSE013064R1 board to prevent localized thermal pockets from affecting the performance of the onboard memory modules and communication transceivers.