Bently Nevada 990-04-50-01-CN Émetteur de vibration 2 fils

Description

The 990-04-50-01-CN is a loop-powered vibration transmitter designed for machinery where vibration needs to be converted into a standard 4 to 20 mA signal for control system use. It is typically applied in compact rotating equipment packages where engineers need stable trend data without implementing a full rack-based monitoring system.

This CN-variant configuration is selected when regional compliance and certification requirements are part of the project specification. In many real installations, this becomes important for export-oriented equipment packages or standardized OEM designs used across multiple sites.

The transmitter processes input from a 3300 NSv proximity probe system and converts shaft vibration into a proportional electrical signal for PLC or DCS input. The 5.0 metre system length makes it suitable for medium-distance probe routing in skid-mounted machinery layouts.

From a field engineering perspective, this model is often chosen when compliance requirements and straightforward installation need to be balanced within a small enclosure footprint.

Engineering Characteristics

• 2-wire loop-powered vibration measurement architecture
• Converts proximity probe displacement into 4 to 20 mA output
• Designed for 3300 NSv probe system compatibility
• DIN rail mounting using 35 mm standard clips
• Integrated signal conditioning electronics (no external module required)
• Stable output for continuous vibration trending
• External zero and span adjustment access
• PROX OUT available for diagnostic waveform checks
• Fault detection with automatic output drop indication
• Compact sealed housing for industrial environments

Application Context

Ordering Structure

Mechanical Data

Interface Overview

Installation Notes (Field Practice View)

In typical cabinet builds, engineers install this module on DIN rail and then verify mechanical stability depending on vibration exposure of the enclosure. For skid-mounted systems, additional fixation is sometimes added to avoid micro-movement over long operation cycles.

Cable routing should be planned early in panel design. Keeping probe signal wiring away from inverter or motor power cables helps reduce noise, especially in 5-metre system layouts where bundling is common.

Before commissioning, probe gap alignment should be verified carefully. Once powered, allow the loop to stabilize before enabling alarm logic in the control system.

The PROX OUT interface is generally used during commissioning or troubleshooting rather than continuous operation in production systems.

FAQ

What is the purpose of the CN suffix in this model?
It indicates a configuration aligned with regional certification requirements used in certain industrial projects.

Is this transmitter suitable for PLC integration?
Yes, it provides a standard 4 to 20 mA output compatible with PLC analog inputs.

What probe system does it support?
It is designed for Bently Nevada 3300 NSv proximity probe systems.

Can it be used in export-oriented equipment?
Yes, it is commonly selected for standardized OEM export configurations.

Is DIN rail mounting standard for this model?
Yes, it uses 35 mm DIN rail clip mounting.

Does it support vibration diagnostics?
It provides a PROX OUT signal for basic diagnostic waveform checks.

Is this a full monitoring system?
No, it is a simplified transmitter for trend-level monitoring.

What happens if the probe fails?
The output drops to a fault-level current indicating NOT OK condition.

What is the operating temperature range?
It operates from -35 degC to +85 degC.

Can it be used on compressors and pumps?
Yes, it is widely applied on rotating machinery such as compressors and pumps.