Danfoss 061B110266 KPI 35 Pressostat

Product Overview

The 061B110266 (KPI 35) is a robust, industrial-grade pressure switch engineered for precision control and monitoring in fluid systems. This device, featuring the 061B110266 part number, is designed for high-cycle applications where reliability is critical to preventing process interruption. Utilizing a high-performance bellows sensing element, it offers excellent sensitivity and repeatability in demanding environments such as HVAC, water treatment, and general hydraulic systems. Its IP65 enclosure ensures full protection against dust ingress and low-pressure water jets, making it an ideal choice for machinery installed in harsh industrial zones.

Suffix Breakdown

The designator 061B110266 follows the established Danfoss nomenclature for the KPI series:

• 0.6: Denotes the pressure setting range for the specific application; in this configuration, it supports a range of Pe = 15.0 bar.
• 1: Specifies the pressure sensing element, utilizing a Bellows construction for fast, accurate response to pressure fluctuations.
• B: Indicates the pressure connection type, featuring a G-thread standard connection for secure hydraulic mounting.
• 4: Specifies the electrical connection size, standardized at Pg 11 to accommodate industrial cabling requirements.
• 66: Defines the operational setting range calibrated between -0.20 and 1.00 bar.

Technical Specifications

FAQs

How do I calibrate the set point for the 061B110266?

Calibration is performed via the internal adjustment screws located under the cover. Use a pressure gauge as a reference while adjusting the main scale to match your required system cut-in and cut-out points.

Can this switch be used in outdoor installations?

Yes, the IP65 rating provides sufficient protection against rain and dust, though it is recommended to mount the unit away from direct, high-pressure weather exposure or corrosive spray environments.

Is this model compatible with corrosive media?

The bellows material is designed for standard industrial fluids and gases. For highly aggressive or corrosive chemicals, please verify media compatibility with the wetted parts list in the official datasheet.

Engineering Best Practices and Maintenance

• Vibration Dampening: In high-vibration environments, such as near large pumps or compressors, mount the switch using flexible capillary lines rather than direct rigid piping to prevent fatigue of the internal bellows element.
• Electrical Termination: Ensure the Pg 11 cable gland is tightened appropriately to maintain the IP65 seal. Use strain relief connectors to prevent mechanical stress on the switch terminals during operation.
• Pressure Surges: If the system is subject to frequent pressure spikes or water hammer, install a snubber or needle valve upstream of the switch to protect the sensing element and extend the operational life of the unit.