Siemens 6AV7240-4DL34-1PA0 SIMATIC IPC 477D Panel PC

Il ne reste que 4 article(s) en stock

Fabricant : Siemens
N° de produit : 6AV7240-4DL34-1PA0
Pays d'origine :Allemagne
Type de produit : Industrial PCs
Code-barres : 85371098
Paiement : Virement bancaire, Western Union
Poids : 7680g
Dimensions : 50 x 40 x 20 cm
Port d'expédition : Xiamen
Garantie : 12 mois

Description

The Siemens 6AV7240-4DL34-1PA0 SIMATIC IPC 477D Panel PC is a fanless industrial computing platform designed for continuous operation in harsh environments. It integrates a 19-inch resistive touch display with a 4:3 aspect ratio, powered by an Intel Core i3-3217UE processor. The unit provides 4 GB of RAM with integrated NVRAM and an 80 GB MLC SSD for data integrity. Pre-installed with Windows Embedded Standard 7 and licensed for WINAC RTX 2010 and WINCC RT Advanced, it serves as a dedicated controller and visualization terminal for distributed control systems.

Features

Fanless cooling design for maintenance-free operation
19-inch XGA TFT display with analog resistive touch
Intel Core i3-3217UE processor, 1.6 GHz
4 GB DDR3 RAM with integrated NVRAM backup
80 GB Solid State Drive (Multi-Level Cell)
PROFIBUS DP 12 Mbps master interface
Dual Gigabit Ethernet (IE/PN) ports
RS-232 serial interface for legacy device integration
Four rear USB 2.0 ports, one front USB 2.0 port
24 V DC industrial power supply input

Applications

Machine-level Human Machine Interface (HMI)
Distributed Control System (DCS) operator stations
PC-based soft PLC control (WINAC RTX)
Data acquisition and recipe management
Manufacturing Execution System (MES) clients
Building automation control panels

Ordering Information

Model	Description
6AV7240-4DL34-1PA0	SIMATIC IPC 477D, 19" Touch, Core i3, 4GB RAM, 80GB SSD, Win Emb Std 7, WinAC RTX 2010, WinCC RT Adv V13/V15

Technical Specifications

Category	Parameter	Specification
General	Manufacturer	Siemens
	Country of Origin	Germany
	Product Type	Industrial Panel PC
	Net Weight	6.40 kg
	Shipping Weight (Calculated)	7.68 kg
Display & Computing	Display Size	19 inches
	Resolution	XGA 1280 x 1024 pixels
	Processor	Intel Core i3-3217UE, 1.6 GHz
	Memory	4 GB DDR3 with NVRAM
	Storage	80 GB SSD (MLC)
	Expansion	No PCIe slots
Software	Operating System	Windows Embedded Standard 7 (32-bit)
	Soft PLC	WINAC RTX 2010 SP2
	HMI Runtime	WINCC RT Advanced V13 SP1 (2048 PowerTags)
	HMI License	WINCC RT Advanced V15 Package
Interfaces	Ethernet	2 x 10/100/1000 Mbps (IE/PN)
	Fieldbus	PROFIBUS DP 12 Mbps Master
	Serial	1 x RS-232
	USB	4 x Rear, 1 x Front (USB 2.0)
	Power Input	24 V DC
Logistics	Commodity Code	85371098
Logistics	Package Dimensions (Calculated)	500 mm x 400 mm x 200 mm

Connections and Interfaces

Connector / Port	Function / Assignment
RJ45 (x2)	Gigabit Ethernet (PROFINET / Industrial Ethernet)
DB9 Female	RS-232 Serial Communication
SUB-D 9-pin Male	PROFIBUS DP 12 Mbps Interface
USB Type A (x5)	Peripheral Connection (Keyboard, Mouse, Storage)
M12 Power Connector	24 V DC Supply Input

Installation Guidelines

CRITICAL WARNING

De-energize all connected control circuits before mounting or servicing. Capacitors within the IPC retain charge after power removal. Disconnect 24 V DC supply and wait 60 seconds before handling connectors. Failure to observe electrostatic discharge (ESD) precautions will result in permanent hardware damage.

1 Verify panel cutout dimensions match the 19-inch format. Ensure rear clearance of at least 100 mm for cable bending radius and heat dissipation.

2 Connect the 24 V DC power line using appropriately sized ferrules. Torque M4 terminal screws to 0.8 N-m. Reverse polarity protection is active, but incorrect wiring may trigger internal fuses.

3 Ground the chassis via the PE (Protective Earth) terminal on the power connector. Use a copper conductor with minimum cross-section of 2.5 mm². Do not rely solely on DIN rail grounding for EMC compliance.

4 For PROFIBUS DP termination, activate the built-in terminating resistor via DIP switch if the unit is the last node on the bus segment. Set the PROFIBUS address via hardware DIP switches prior to applying power.

Key Features:

#Panel PCs #SIMATIC IPC 477D

Is STEP 5 software supported on this device?

No. The device runs Windows 7 Ultimate 64-bit, which is incompatible with STEP 5. It supports STEP7 Professional and STEP 7 Micro/WIN V4.0.

What is the purpose of the included MPI cable?

The MPI cable connects the Field PG to the MPI/DP interface of SIMATIC S7-300 or S7-400 PLCs for programming and diagnostics.

Can the RAM be upgraded beyond 16 GB?

No. The system is configured with two 8 GB modules populating both available slots. The chipset supports a maximum of 16 GB.

Does the device include an S5-EPROMMER interface?

No. This Premium Plus model is configured without the S5 interface and S5-EPROMMER functionality.

Expédition express mondiale

Livraison standard : 4 à 6 jours ouvrables via DHL, FedEx et UPS.
Expédition express : Expédition le jour même pour les commandes en stock passées avant 14h00 (GMT+8).
Couverture mondiale : Service dans plus de 150 pays, avec livraison rapide en Arabie Saoudite et aux Émirats arabes unis.

Retours et garantie

Garantie de 30 jours : Retours acceptés pour les produits en stock dans leur emballage d’origine scellé en usine.
Garantie de 12 mois : Chaque composant industriel est couvert par notre garantie technique professionnelle.

Les commandes sont traitées et livrées du lundi au vendredi (hors jours fériés).

Pour connaître les conditions d’éligibilité complètes, les frais de restockage et les détails des retours internationaux, veuillez consulter notre site officiel Politique de remboursement et de retour .

TECHNICAL SPECIFICATIONS

Color pattern	Blanc grisâtre
Country of origin	Allemagne

Siemens 6AV7240-4DL34-1PA0 SIMATIC IPC 477D Panel PC