Siemens 6AV7613-0AE12-0AH0 SIMATIC Panel PC 670

Il ne reste que 5 article(s) en stock

Fabricant : Siemens
N° de produit : 6AV7613-0AE12-0AH0
Pays d'origine :Allemagne
Type de produit : PC panneau
Code-barres : 85371091
Paiement : Virement bancaire, Western Union
Poids : 4g
Dimensions : 45 x 35 x 20 cm
Port d'expédition : Xiamen
Garantie : 12 mois

Description

This is a SIMATIC Panel PC 670, model 6AV7613-0AE12-0AH0, manufactured by Siemens. It is an industrial human-machine interface (HMI) designed for machine-level visualization and control tasks. This standard configuration features a 12-inch TFT display, a 500 MHz Pentium III CPU, 64 MB of RAM, and a 40 GB hard drive. The unit operates on a 24 V DC power supply and comes pre-installed with the Windows NT 4.0 operating system in German. Please note that this product line is considered obsolete by the manufacturer.

Features

12-inch color TFT display for process visualization.
Powered by a 500 MHz Intel Pentium III processor.
Equipped with 64 MB of system RAM.
Includes a 40 GB internal hard drive for data and application storage.
Operates on a nominal 24 V DC industrial power source.
Pre-loaded with Windows NT 4.0 operating system (German language version).

Applications

Machine control and operation panels
Process visualization and SCADA clients
Industrial data acquisition and logging
Factory automation control rooms
Manufacturing execution systems (MES) terminals

Technical Specifications

Specification	Value
Manufacturer	Siemens
Model Number	6AV7613-0AE12-0AH0
Product Series	SIMATIC Panel PC 670
Product Type	Panel PC
Display	12-inch TFT
Processor (CPU)	Pentium III, 500 MHz
Memory (RAM)	64 MB
Storage	40 GB Hard Drive (HD)
Power Supply Input	24 V DC
Operating System	Windows NT 4.0 (German)
Product Lifecycle Status	Obsolete
Shipping Weight	4.00 kg
Commodity Code	85371091
Export Control (ECCN)	N
Country of Origin	Germany (Estimate)
Package Dimensions (Calculated)	45 x 35 x 20 cm

Installation Guidelines

CRITICAL WARNING: Hazardous voltages may be present. Installation must be performed by qualified personnel only. Failure to de-energize equipment and follow Lockout/Tagout (LOTO) procedures before installation can result in severe injury or death.

1 Prepare Enclosure: Ensure the target panel or enclosure is properly prepared with the correct cutout dimensions for the Panel PC. Verify that the mounting surface is flat, clean, and provides adequate structural support.
2 Mount the Unit: Insert the Panel PC into the prepared cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal and prevent bezel distortion.
3 Establish Ground Connection: Connect the chassis ground terminal of the Panel PC to the enclosure's main protective earth (PE) bus bar using a low-impedance conductor. A reliable ground connection is critical for safety and noise immunity.
4 Connect Power Supply: With the main power source de-energized, connect the 24 V DC supply to the unit's power input terminals. Verify correct polarity (+/-) before connection. Use appropriately sized wiring and ensure the power source is stable and within the device's specified voltage range.
5 Connect Peripherals and Network: Connect all required communication cables (e.g., Ethernet, serial) and I/O devices. Route cables neatly, avoiding sharp bends and proximity to high-voltage lines to minimize electromagnetic interference.

Key Features:

What is the processor and clock speed of this Panel PC?

The 6AV7613-0AE12-0AH0 is equipped with an Intel Pentium III CPU running at 500 MHz.

What operating system is installed on this unit?

This Panel PC comes pre-installed with the Windows NT 4.0 operating system in the German language version.

What is the required input power supply voltage?

The unit requires a nominal 24 V DC power supply for operation.

What are the display specifications?

This model features a 12-inch color TFT display.

Is this product line still in current production?

No, the SIMATIC Panel PC 670 series, including this model, is classified as an obsolete product by Siemens.

Expédition express mondiale

Livraison standard : 4 à 6 jours ouvrables via DHL, FedEx et UPS.
Expédition express : Expédition le jour même pour les commandes en stock passées avant 14h00 (GMT+8).
Couverture mondiale : Service dans plus de 150 pays, avec livraison rapide en Arabie Saoudite et aux Émirats arabes unis.

Retours et garantie

Garantie de 30 jours : Retours acceptés pour les produits en stock dans leur emballage d’origine scellé en usine.
Garantie de 12 mois : Chaque composant industriel est couvert par notre garantie technique professionnelle.

Les commandes sont traitées et livrées du lundi au vendredi (hors jours fériés).

Pour connaître les conditions d’éligibilité complètes, les frais de restockage et les détails des retours internationaux, veuillez consulter notre site officiel Politique de remboursement et de retour .