Mitsubishi Electric GT1575-VNBD GOT1000 Series Touch Screen HMI

Description

Designed for robust industrial monitoring and machine control, the GT1575-VNBD serves as a reliable operator terminal within the Mitsubishi Electric GOT1000 platform. This touch screen HMI provides clear graphical visualization and comprehensive system diagnostics directly on the factory floor. Configured with a 10.4-inch display, it enables quick-response touch operations and accommodates dense visual schematics for intricate automation layouts. Incorporating extensive built-in communication interfaces and expansion options, this terminal links seamlessly with PLCs, variable speed drives, and motion controllers.

Features

• High-contrast 10.4-inch TFT LCD panel offering clear visualization under varied lighting conditions.
• Analog resistive touch screen allowing flexible touch key layouts and dual-point press prevention.
• Integrated RS-232 and RS-422/485 interfaces for direct connection to host controllers.
• Built-in CF card slot supporting data logging, alarm history collection, and recipe management.
• Expandable bus connection system for Ethernet, CC-Link, and Melseclnet communication options.
• IP67f ingress protection rating on the front panel when properly mounted.

Applications

• Automotive assembly lines and conveyor control.
• Packaging, labeling, and filling machinery.
• Water treatment and environmental monitoring stations.
• Food and beverage thermal processing lines.

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Mounting Location: Install the HMI into a flat panel of an industrial enclosure. Ensure the mounting gasket is correctly seated in its groove to maintain sealing integrity.
• Torque Limits: Tighten the supplied panel mounting brackets to a torque of 0.36 to 0.48 N-m. Over-tightening may warp the front panel or crack the housing.
• Clearance Requirements: Leave at least 100 mm of clearance space behind and around the unit for proper heat dissipation and cable routing.
• Grounding: Connect the ground terminal of the HMI power connector to a dedicated functional ground (Class D, ground resistance of 100 ohms or less) using a minimum 2 mm2 gauge wire.

Compliance and Certifications

• CE Directive Compliance (EMC and Low Voltage Directives)
• UL / cUL Listed (Class I, Division 2, Groups A, B, C, D hazardous locations)
• KC (Korean Certification for electromagnetic compatibility)