Produsen: BECKHOFF
Nomor Produk: KL4022
Negara asal:Jerman
Jenis Produk: Analog Output Modules
Pembayaran: T/T, Western Union
Berat: 1000g
Pelabuhan pengiriman: Xiamen
Garansi: 12 bulan
Designed for integration into standard K-bus networks, the Beckhoff KL4022 enables high-precision processing of current loop control signals. This terminal converts 12-bit digital values from the automation controller into isolated analog current outputs within the standard 4 to 20 mA range. Its single-ended topology, compact housing, and low conversion latency make it highly suitable for demanding industrial actuator control, valve positioning, and motor drive setpoint configuration.
| Parameter | Value / Rating |
|---|---|
| Manufacturer | Beckhoff Automation |
| Model Number | KL4022 |
| Signal Range | 4 to 20 mA |
| Number of Channels | 2 |
| Resolution | 12-bit |
| Load Impedance | Less than 500 Ohm |
| Conversion Time | approx. 1.5 ms |
| Output Error | Less than +/- 0.1% (relative to full-scale value) |
| Power Supply | 24 V DC via power contacts (or 15 V DC via KL9515 supply terminal) |
| K-Bus Current Consumption | typ. 75 mA |
| Electrical Isolation | 500 V (K-bus / signal voltage) |
| Operating Temperature | -25 to +60 degC |
| Storage Temperature | -40 to +85 degC |
| Relative Humidity | 95%, non-condensing |
| Country of Origin | Germany |
| Weight | approx. 80 g |
| Shipping Weight (Calculated) | 0.25 kg |
| Terminal Point | Signal Assignment | Description |
|---|---|---|
| 1 | OUT 1 | Analog Output Channel 1 (+) |
| 5 | 0V (1) | Analog Output Channel 1 ground (-) |
| 2 | OUT 2 | Analog Output Channel 2 (+) |
| 6 | 0V (2) | Analog Output Channel 2 ground (-) |
| 3 | +24 V | Power Contact Connection (+24 V DC) |
| 7 | 0 V | Power Contact Connection (0 V DC) |
| 4 | Shield | Shield contact point (connected to DIN rail) |
| 8 | Shield | Shield contact point (connected to DIN rail) |
The KL4022 utilizes Beckhoff's legacy K-bus backplane communication system. If transitioning to an EtherCAT infrastructure, the direct equivalent is the EL4022. Note that EL-series terminals utilize the E-bus and cannot reside on standard KL-series couplers (e.g., BK9000, BK3120) without active E-bus/K-bus converter couplers.
Since the KL4022 is a single-ended terminal sharing a common internal ground loop, noise injected into the 0 V signal reference on one loop can cause cross-talk or offset drift on the secondary channel. For field installations with significant ground potential differences, isolated signal conditioning barriers must be installed between the KL4022 and the end-actuator to prevent loop degradation.
Ensure that shielding is correctly terminated. Terminal points 4 and 8 are connected to the mounting rail. To guarantee sufficient noise rejection, the standard 35 mm DIN rail must be connected to the central control cabinet ground with low-impedance copper braided strap. Ensure K-bus power contacts are adequately populated with 24 V DC; voltage drops below 18 V DC will cause conversion errors or terminal fault signals within TwinCAT.
CRITICAL WARNING: ELECTRICAL HAZARD
Isolate and lock out all power supplies to the system before inserting or removing K-bus components. Modifying the physical configuration or terminal assembly while the power is active can induce voltage spikes, resulting in damage to the internal bus driver circuitry or physical terminal contacts.
Mount the terminal onto the 35 mm DIN rail (EN 60715) by sliding the terminal's rear slot onto the rail guide until the locking tab audibly clicks.
Align the terminal laterally with the adjacent Bus Terminal block to engage the tongue-and-groove joint and establish continuous electrical contact via the side-mounted gold contacts.
Insert field connection cables into the cage-clamp connectors using an appropriate industrial screwdriver. Release the mechanism to secure wire connection.
Connect the analog loop shielding directly to contacts 4 or 8 to guarantee direct path grounding through the DIN rail structure.
Pengiriman Ekspres Global
Pengembalian & Garansi
Pesanan diproses dan dikirimkan Senin-Jumat (tidak termasuk hari libur nasional).
Untuk kelayakan penuh, biaya pengisian ulang, dan detail pengembalian internasional, silakan lihat resmi kami Kebijakan Pengembalian & Pengembalian Dana .
| Country of origin |
Jerman
|
Artikel ini menjelaskan bagaimana aktuator listrik terintegrasi, seperti seri e-Actuator dari SMC, mengubah kontrol gerak industri dengan menggantikan sistem pneumatik dan hidrolik tradisional....
Artikel ini menjelaskan bagaimana sistem PLC melakukan operasi matematika inti seperti penjumlahan, pengurangan, perkalian, pembagian, modulo, dan perpangkatan dalam otomasi industri. Artikel ini...
Artikel ini menjelaskan beberapa fungsi logika Boolean lanjutan yang digunakan dalam pemrograman PLC selain operasi dasar AND, OR, dan NOT. Artikel ini membahas bagaimana alat seperti tabel...
Logika Boolean adalah dasar dari setiap program PLC. Dari kontrol mesin sederhana hingga sistem otomasi industri yang kompleks, gerbang logika menentukan bagaimana pengendali merespons perubahan...
Firewall industri memainkan peran penting dalam keamanan siber OT, melindungi jaringan PLC, DCS, dan SCADA melalui segmentasi, kontrol masuk/keluar, dan integrasi IDS/IPS yang sesuai dengan prinsip...
Gripper robot modern berkembang melampaui rahang mekanis tradisional. Mulai dari sistem adhesif yang terinspirasi oleh cicak dan gripper lembut yang aman untuk makanan hingga alat gudang bertenaga...
