Bently Nevada 330103-00-16-10-01-00 3300 XL 8 mm Proximity Probe

Description

330103-00-16-10-01-00: 3300 XL 8 mm proximity probe, M10 x 1 metric thread, Option 00 fully threaded body (0 mm unthreaded length), Option 16 160 mm case length, Option 10 1.0 m total length, Option 01 miniature coaxial ClickLoc connector with connector protector, standard cable, Option 00 no agency approvals.

This specific configuration incorporates a factory-installed connector protector (Option 01) to safeguard the ClickLoc connection against environmental contaminants and mechanical stress during operation, contrasting with option 02 variants that omit the protector. The 1.0-meter integrated standard cable functions as the initial link in a 5-meter or 9-meter transducer loop, pairing with a 3300 XL extension cable and 3300 XL Proximitor sensor for non-contact shaft vibration and displacement measurements.

Features

• Option 00 specifies a 0 mm unthreaded length, providing a fully threaded M10 x 1 probe body.
• Option 16 specifies a 160 mm overall case length, ideal for deeper mounting depth requirements.
• Option 10 specifies a 1.0 meter (3.3 feet) total integrated cable length without armor.
• Option 01 specifies a miniature coaxial ClickLoc connector featuring a pre-installed connector protector.
• Option 00 specifies no agency approvals, making this probe suited for general-purpose applications.
• Constructed with a polyphenylene sulfide (PPS) tip and AISI 303 stainless steel case for robust chemical resistance.
• Integrated Viton O-ring provides a secure pressure seal between the tip assembly and case.

Applications

• Radial vibration measurements on fluid-film bearing machinery.
• Axial thrust position tracking on rotating equipment.
• Keyphasor and speed measurements on industrial shafts.
• Casing expansion and rotor displacement monitoring in turbomachinery.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

Always verify the electrical "click" connection when mating the probe to the extension cable. Ensure that the M10 x 1 threads do not exceed 15 mm of engagement to avoid binding. The probe body must be installed within safe-area environmental conditions as specified by Option 00. Maintain a minimum bend radius of 25.4 mm (1.0 in) on the integrated coaxial cable during routing to prevent signal attenuation.