Bently Nevada 330103-00-21-05-11-05 3300 XL 8 mm Proximity Probe

Description

330103-00-21-05-11-05: 3300 XL 8 mm proximity probe, metric M10 x 1 thread, Option 00 fully threaded (0 mm unthreaded length), Option 21 overall case length of 210 mm, Option 05 total length of 0.5 meters (1.6 feet), Option 11 miniature ClickLoc coaxial connector with connector protector and FluidLoc cable, and Option 05 CSA/ATEX/IECEx hazardous area approvals.

This eddy-current proximity probe is used with a 3300 XL Proximitor sensor and extension cable. The FluidLoc cable option prevents oil or other process fluids from leaking out of the machine along the cable interior. The integrated connector protector provides environmental sealing and mechanical protection for the ClickLoc connection. Operating over a 2 mm (80 mils) linear range, it measures static (position) and dynamic (vibration) parameters on rotating machinery.

Features

• Miniature coaxial ClickLoc connector with integrated connector protector (Option 11)
• FluidLoc cable design to prevent process fluid migration along the cable interior
• Metric M10 x 1 threaded case without stainless steel armor (Option 330103)
• 210 mm overall case length (Option 21) with 0 mm unthreaded section (Option 00)
• 0.5 meter (1.6 feet) total probe length (Option 05)
• Hazardous area certifications including CSA, ATEX, and IECEx approvals (Option 05)
• Compatible with Bently Nevada 3300 XL 8 mm proximity transducer systems

Applications

• Radial vibration and shaft position measurements
• Axial thrust position monitoring
• Rotating machinery protection in petrochemical plants, refineries, and power generation facilities
• Fluid-sealed bearings and high-pressure enclosures requiring FluidLoc cable protection

Ordering Information

Technical Specifications

Installation Guidelines

• Grounding: Shielding should be continuous from the probe to the monitor, with the shield grounded only at the monitor end.
• Thread Engagement: Do not exceed 15 mm of thread engagement for M10 x 1 threads to prevent binding.
• Connector Torque: Connectors should be finger-tight only.
• Gap Setting: A typical gap voltage of -9 Vdc corresponds to approximately 1.27 mm (50 mils) distance.

Compliance and Certifications

• Hazardous Area Approvals: CSA, ATEX, IECEx (Option 05)
• China Hazardous Area Approval: Available under the -CN suffix option (NEPSI, CCC)