Bently Nevada 330104-01-09-10-12-05 3300 XL 8 mm Proximity Probe

Description

Option 01 (10 mm unthreaded length) and Option 12 (FluidLoc cable with ClickLoc connector) specify this 3300 XL 8 mm proximity probe configuration — 330104-01-09-10-12-05.

This specific configuration features an overall case length of 90 mm (Option 09) and a 1.0-meter total length (Option 10). Unlike standard variants that utilize basic standard cabling, this model is equipped with a FluidLoc cable (Option 12), which prevents oil and other fluids from leaking through the cable interior. It also integrates a protective stainless steel conduit armor over the coaxial cable to guard against mechanical damage in demanding environments. Certified with CSA, ATEX, and IECEx approvals (Option 05), this armored metric probe is suitable for hazardous area installation.

Features

• Option 01: 10 mm unthreaded portion of the metric M10 x 1 threaded case.
• Option 09: 90 mm overall case length with M10 x 1 threads for depth insertion.
• Option 10: 1.0 meter (3.3 feet) total cable length for close-coupled installations.
• Option 12: Miniature coaxial ClickLoc connector with FluidLoc cabling to prevent moisture or oil migration through the internal cable core.
• Option 05: CSA, ATEX, and IECEx safety certifications for hazardous industrial areas.
• Integral Stainless Steel Armor: Metal armor shielding the coaxial line to resist abrasive wear and mechanical impacts.
• M10 x 1 Threaded Body: Robust metric thread construction for direct mounting.

Applications

• Steam turbines, gas turbines, and hydro turbines.
• Centrifugal compressors, process pumps, and industrial fans.
• Hydrocarbon processing and power generation facilities.
• Machinery vibration monitoring and shaft axial displacement systems.

Ordering Information

Technical Specifications

Installation Guidelines

• Limit thread engagement of the M10 x 1 threaded body to a maximum of 15 mm during installation to prevent binding or housing damage.
• Always hand-tighten gold ClickLoc coaxial connectors. Do not use pliers or other mechanical tools on gold connectors to prevent damage.
• Ensure side clearance around the 8.0 mm probe tip is at least 8.0 mm to avoid electrical interference from surrounding metals.
• Avoid exceeding the minimum bend radius of the armored cable during routing to maintain signal path and protect the conduit.
• Verify that the shield is connected at the Proximitor sensor end only to prevent ground loop noise.

Compliance and Certifications

• CSA: Approved for Class I, Division 1 and 2; Class II, Division 1 and 2 hazardous locations.
• ATEX/IECEx: Certified for Ex ia IIC (intrinsically safe) and Ex nA IIC (non-sparking) zones.