Kabel Perpanjangan Bently Nevada 330730-040-00-05 3300 XL 11 mm

Description

330730-040-00-05 specifies this 3300 XL 11 mm extension cable configuration with a 4.0 meter length, standard unarmored construction, and multiple hazardous area agency approvals. It connects a 3300 XL 11 mm proximity probe to a 3300 XL Proximitor sensor. When added together, the probe length and extension cable length must match the Proximitor sensor total system length (typically 5.0 meters or 9.0 meters) to ensure accurate, non-contact eddy-current displacement measurements.

Unlike variants with stainless steel armor (Option 01) or FluidLoc fluid-barrier cable jackets (Option 10), this option uses a standard unarmored fluoroethylene propylene (FEP) coaxial cable jacket. The multiple approvals option (Option 05) provides hazardous area certifications for intrinsically safe and non-incendive installations.

Features

• Cable length of 4.0 meters (13.1 feet) for exact matching in 5.0 m or 9.0 m total transducer system lengths.
• Standard FEP insulated 75 Ohm coaxial cable design without stainless steel armor.
• Gold-plated brass miniature coaxial ClickLoc connectors at both ends for precise electrical contact.
• Operating and storage temperature range from -52 degC to +177 degC.
• Multiple approvals (Option 05) certified for intrinsically safe (Ex ia) and non-incendive (Ex nA/Ex ec) installations.

Applications

• Shaft vibration and axial position monitoring in heavy industrial rotating machinery.
• Steam turbine and gas turbine rotor position tracking.
• High-speed centrifugal compressor vibration analysis.
• Industrial pumps and gearboxes requiring non-contact displacement sensing in hazardous areas.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

Maintain the minimum bend radius of 25.4 mm (1.0 in) during routing to prevent coaxial core damage. Ensure that the probe-to-extension cable connections are tightened finger-tight, up to a maximum recommended connector torque of 0.565 N-m (5 in-lb). Coaxial connectors must be dry and free of oil or contaminants before assembly. Use of connector protectors or silicone self-coupling tape is recommended for environments exposed to moisture or liquid contaminants, but silicone tape is not recommended in turbine oil environments.

Compliance and Certifications

• EMC Directive: 2014/30/EU (EN 61000-6-2, EN 61000-6-4)
• RoHS Directive: 2011/65/EU
• China RoHS: EFUP designation of 15 years
• Hazardous Area Approvals (Option 05): CSA, ATEX, and IECEx certifications for intrinsically safe (Ex ia) and non-incendive (Ex nA/Ex ec) installations
• Functional Safety: SIL 2 (HFT = 0), SIL 3 (HFT = 1) capable