The 084G2107 (084G2107) is a high-performance pressure transmitter from the renowned EMP 2 series, specifically engineered for demanding industrial and marine applications. Designed to monitor gauge (relative) pressure in systems ranging from 0 to 6 bar, this unit is a critical component for engine cooling systems, hydraulic power units, and water treatment automation. The 084G2107 is built to withstand harsh environmental conditions, offering a typical accuracy of 0.5% FS and long-term stability that minimizes maintenance cycles. Its robust terminal block connection and IP65-rated housing ensure reliable signal transmission even in high-vibration or high-moisture environments.
The 084G2107 features the EMP 2 series' signature heavy-duty design, utilizing a G 1/2 pressure connection (standard EN 228-1) with an internal G 1/4 interface for maximum mounting flexibility. Unlike flush-diaphragm models, this transmitter uses a standard pressure port optimized for clean or filtered liquids and gases. The electrical interface is managed via a Pg 13.5 terminal block, allowing for secure field wiring of the 4-20 mA output loop. To ensure precision across varying climates, the device includes an internal compensated temperature range of 0 to 70 deg C, which effectively filters out thermal-induced signal drift.
| Attribute | Specification |
| Model | 084G2107 |
| Brand | Danfoss |
| Specification Key | EMP 2-1811-F6CD24-2 |
| Pressure Range | 0 to 6 bar (0 to 87.02 psi) |
| Pressure Reference | Gauge (Relative) |
| Output Signal | 4 - 20 mA (Current) |
| Supply Voltage | 12 - 32 VDC |
| Accuracy (Typical) | 0.5 % FS |
| Pressure Connection | G 1/2 Male / G 1/4 Female |
| Enclosure Rating | IP65 |
| Response Time | 4 ms (Max) |
| Overload Pressure | 18 bar |
| Net Weight | 1.0 kg (Approx.) |
| Shipping Weight | 2.5 kg |
What are the wiring designations for the terminal block?
The 084G2107 uses a standard two-wire current loop configuration. Connect the positive DC supply to the P terminal (+ supply) and the return/common to the N terminal (- common).
How does the 18 bar overload pressure rating benefit my system?
The 18 bar rating provides a safety margin three times higher than the operating range (6 bar). This protects the internal sensing element from permanent damage or calibration shifts caused by sudden hydraulic surges or pressure spikes during system start-up.
Can this transmitter be used in seawater or corrosive chemical applications?
The EMP 2 series is generally built for durability; however, always verify that the wetted parts (G 1/2 stainless steel or alloy) are compatible with your specific medium. For highly corrosive acids, a chemical seal or isolated barrier may be required.
Terminal Block Wiring: Use the Pg 13.5 cable gland to ensure a watertight seal. When stripping wires for the terminal block, ensure no stray strands are protruding, as the compact spacing within the EMP 2 housing can lead to short circuits under high-vibration conditions.
Vibration Dampening: In marine engine or pump room installations, mount the transmitter on a bracket that is mechanically isolated from the primary vibration source. While the unit is rated for industrial use, constant high-frequency resonance can cause micro-fatigue in the internal electronics over several years of service.
Venting and Pressure Reference: Since this is a Gauge (Relative) pressure transmitter, ensure the internal reference port (located near the electrical entry) is not blocked by paint, grease, or heavy insulation. Proper venting is required for the sensor to accurately compare process pressure against current atmospheric pressure.
Global Express Shipping
Returns & Warranty
Manufacturer: Danfoss
Product No.: 084G2107
Country of origin:Denmark
Product Type: Pressure Transmitter
Payment: T/T, Western Union
Weight: 2500g
Shipping port: Xiamen
Warranty: 12 months
The 084G2107 (084G2107) is a high-performance pressure transmitter from the renowned EMP 2 series, specifically engineered for demanding industrial and marine applications. Designed to monitor gauge (relative) pressure in systems ranging from 0 to 6 bar, this unit is a critical component for engine cooling systems, hydraulic power units, and water treatment automation. The 084G2107 is built to withstand harsh environmental conditions, offering a typical accuracy of 0.5% FS and long-term stability that minimizes maintenance cycles. Its robust terminal block connection and IP65-rated housing ensure reliable signal transmission even in high-vibration or high-moisture environments.
The 084G2107 features the EMP 2 series' signature heavy-duty design, utilizing a G 1/2 pressure connection (standard EN 228-1) with an internal G 1/4 interface for maximum mounting flexibility. Unlike flush-diaphragm models, this transmitter uses a standard pressure port optimized for clean or filtered liquids and gases. The electrical interface is managed via a Pg 13.5 terminal block, allowing for secure field wiring of the 4-20 mA output loop. To ensure precision across varying climates, the device includes an internal compensated temperature range of 0 to 70 deg C, which effectively filters out thermal-induced signal drift.
| Attribute | Specification |
| Model | 084G2107 |
| Brand | Danfoss |
| Specification Key | EMP 2-1811-F6CD24-2 |
| Pressure Range | 0 to 6 bar (0 to 87.02 psi) |
| Pressure Reference | Gauge (Relative) |
| Output Signal | 4 - 20 mA (Current) |
| Supply Voltage | 12 - 32 VDC |
| Accuracy (Typical) | 0.5 % FS |
| Pressure Connection | G 1/2 Male / G 1/4 Female |
| Enclosure Rating | IP65 |
| Response Time | 4 ms (Max) |
| Overload Pressure | 18 bar |
| Net Weight | 1.0 kg (Approx.) |
| Shipping Weight | 2.5 kg |
What are the wiring designations for the terminal block?
The 084G2107 uses a standard two-wire current loop configuration. Connect the positive DC supply to the P terminal (+ supply) and the return/common to the N terminal (- common).
How does the 18 bar overload pressure rating benefit my system?
The 18 bar rating provides a safety margin three times higher than the operating range (6 bar). This protects the internal sensing element from permanent damage or calibration shifts caused by sudden hydraulic surges or pressure spikes during system start-up.
Can this transmitter be used in seawater or corrosive chemical applications?
The EMP 2 series is generally built for durability; however, always verify that the wetted parts (G 1/2 stainless steel or alloy) are compatible with your specific medium. For highly corrosive acids, a chemical seal or isolated barrier may be required.
Terminal Block Wiring: Use the Pg 13.5 cable gland to ensure a watertight seal. When stripping wires for the terminal block, ensure no stray strands are protruding, as the compact spacing within the EMP 2 housing can lead to short circuits under high-vibration conditions.
Vibration Dampening: In marine engine or pump room installations, mount the transmitter on a bracket that is mechanically isolated from the primary vibration source. While the unit is rated for industrial use, constant high-frequency resonance can cause micro-fatigue in the internal electronics over several years of service.
Venting and Pressure Reference: Since this is a Gauge (Relative) pressure transmitter, ensure the internal reference port (located near the electrical entry) is not blocked by paint, grease, or heavy insulation. Proper venting is required for the sensor to accurately compare process pressure against current atmospheric pressure.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Color pattern |
Silver
|
| Country of origin |
Denmark
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
