Description

The BECKHOFF IP2301-B200 is a Lightbus-compatible Fieldbus Box designed for distributed automation topologies in demanding physical environments. By integrating digital inputs and digital outputs into a single compact housing, this module allows direct, localized connection of sensors and actuators without requiring an additional protective control cabinet. The device interfaces with the Beckhoff Lightbus system, capitalizing on optical fiber data transmission to guarantee exceptional noise immunity and rapid communication cycles across the field level.

Equipped with an IP67 protection rating, the BECKHOFF IP2301-B200 is highly resistant to dust, moisture, and mechanical stress, making it suitable for direct mounting on machinery. Signal routing is facilitated through vibration-resistant M8 connections, minimizing wiring complexity and lowering potential points of failure in localized automated installations.

Features

• Four digital inputs (24 V DC) with a 3 ms input filter for signal stabilization
• Four digital outputs (24 V DC) with up to 0.5 A switching capability per channel
• Lightbus optical fiber interface (B200) for noise-immune network communication
• Vibration-resistant M8 circular screw connectors for reliable sensor and actuator connections
• IP67-rated housing for decentralized installation directly on machinery
• Compact, space-saving design ideal for mounting in constrained locations

Applications

• Decentralized input and output routing on manufacturing machinery and assembly lines
• Distributed automated systems where high electromagnetic interference (EMI) is present
• Material handling systems, packaging equipment, and industrial positioning setups
• Direct machine-mount sensor and actuator integration requiring IP67 physical protection

Technical Specifications

General

Signal and I/O

Communication and Connections

Installation Guidelines

1. Verify that the received model is the exact BECKHOFF IP2301-B200 and inspect the physical housing and connector pins for transport damage.
2. Ensure all system power supplies are completely de-energized before mounting, wiring, or servicing the module.
3. Securely mount the module directly to the machine framework or a mounting plate using the integrated mounting holes.
4. Connect the Lightbus optical fiber cables to the dedicated fieldbus ports, respecting proper transmit (Tx) and receive (Rx) designations and standard fiber bend radii.
5. Wire the sensors and actuators to the corresponding M8 screw connectors, ensuring they are hand-tightened and correctly torqued to maintain the IP67 liquid-tight seal.
6. Apply 24 V DC supply voltage to the module and perform initial configuration and diagnostics via your Lightbus master interface.