190501-02-00-01 is a Bently Nevada Velomitor CT velocity transducer designed for direct casing vibration monitoring in industrial rotating machinery. This sensor converts mechanical vibration velocity into a stable electrical signal for continuous condition monitoring systems. It is widely applied in turbines, compressors, pumps, and balance-of-plant equipment where vibration trends directly indicate mechanical degradation.
The device is engineered for harsh environments in power plants, oil and gas facilities, and heavy process industries. Its 316L stainless steel housing ensures corrosion resistance under chemical exposure and offshore conditions. The CT configuration improves signal stability in low to medium frequency vibration ranges, helping maintenance teams detect imbalance, misalignment, and bearing wear before failure occurs.
02 = Mounting stud adapter 3/8 in 24 to 1/2 in 20
00 = MIL-C-5015 industrial connector interface
01 = Multiple agency approvals for industrial and hazardous area compliance
The transducer uses a rugged top-mounted MIL-C-5015 connector for secure electrical connection under vibration stress. The mounting interface ensures mechanical stability with controlled torque requirements to maintain measurement accuracy over long operational cycles.
| Parameter | Details |
|---|---|
| Model | 190501-02-00-01 |
| Brand | Bently Nevada |
| Product Type | Velomitor CT Velocity Transducer |
| Origin | Made in U.S.A |
| Housing Material | 316L stainless steel |
| Mounting Surface | 33 mm diameter |
| Mounting Thread | 3/8 in 24 to 1/2 in 20 stud |
| Connector Type | MIL-C-5015, 2-pin stainless steel |
| Operating Temperature | -40 to +85 deg C |
| Storage Temperature | -40 to +100 deg C |
| Mounting Torque | 4.5 N-m ± 0.6 N-m |
| Measurement Type | Vibration velocity |
| Output Signal | Analog velocity proportional |
| Weight | 0.297 kg |
| Shipping Weight | 1.5 kg |
| Power Consumption | Passive sensor, external system powered |
Can this transducer be used on steam turbine casings?
Yes. It is designed for turbine and compressor casing vibration monitoring in high reliability environments.
What monitoring system is compatible with this model?
It integrates with Bently Nevada vibration monitoring racks and compatible condition monitoring systems.
Why is 316L stainless steel used for the housing?
316L provides corrosion resistance in chemical, offshore, and high humidity environments while maintaining mechanical strength.
What happens if mounting torque is incorrect?
Incorrect torque reduces signal transmission accuracy and may introduce vibration measurement errors or mechanical loosening.
Install the sensor on a rigid, flat mounting surface with proper surface preparation. Poor mounting contact reduces vibration transmission accuracy.
Apply specified torque of 4.5 N-m to ensure stable mechanical coupling without overstressing the stud interface. Over-torque may damage threads or distort sensor alignment.
Route signal cables away from high power drives and variable frequency drives to reduce electromagnetic interference. Proper shielding improves long-term signal stability in noisy environments.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 190501-02-00-01
Country of origin:United States
Product Type: Velomitor CT Velocity Transducer
Payment: T/T, Western Union
Weight: 297g
Shipping port: Xiamen
Warranty: 12 months
190501-02-00-01 is a Bently Nevada Velomitor CT velocity transducer designed for direct casing vibration monitoring in industrial rotating machinery. This sensor converts mechanical vibration velocity into a stable electrical signal for continuous condition monitoring systems. It is widely applied in turbines, compressors, pumps, and balance-of-plant equipment where vibration trends directly indicate mechanical degradation.
The device is engineered for harsh environments in power plants, oil and gas facilities, and heavy process industries. Its 316L stainless steel housing ensures corrosion resistance under chemical exposure and offshore conditions. The CT configuration improves signal stability in low to medium frequency vibration ranges, helping maintenance teams detect imbalance, misalignment, and bearing wear before failure occurs.
02 = Mounting stud adapter 3/8 in 24 to 1/2 in 20
00 = MIL-C-5015 industrial connector interface
01 = Multiple agency approvals for industrial and hazardous area compliance
The transducer uses a rugged top-mounted MIL-C-5015 connector for secure electrical connection under vibration stress. The mounting interface ensures mechanical stability with controlled torque requirements to maintain measurement accuracy over long operational cycles.
| Parameter | Details |
|---|---|
| Model | 190501-02-00-01 |
| Brand | Bently Nevada |
| Product Type | Velomitor CT Velocity Transducer |
| Origin | Made in U.S.A |
| Housing Material | 316L stainless steel |
| Mounting Surface | 33 mm diameter |
| Mounting Thread | 3/8 in 24 to 1/2 in 20 stud |
| Connector Type | MIL-C-5015, 2-pin stainless steel |
| Operating Temperature | -40 to +85 deg C |
| Storage Temperature | -40 to +100 deg C |
| Mounting Torque | 4.5 N-m ± 0.6 N-m |
| Measurement Type | Vibration velocity |
| Output Signal | Analog velocity proportional |
| Weight | 0.297 kg |
| Shipping Weight | 1.5 kg |
| Power Consumption | Passive sensor, external system powered |
Can this transducer be used on steam turbine casings?
Yes. It is designed for turbine and compressor casing vibration monitoring in high reliability environments.
What monitoring system is compatible with this model?
It integrates with Bently Nevada vibration monitoring racks and compatible condition monitoring systems.
Why is 316L stainless steel used for the housing?
316L provides corrosion resistance in chemical, offshore, and high humidity environments while maintaining mechanical strength.
What happens if mounting torque is incorrect?
Incorrect torque reduces signal transmission accuracy and may introduce vibration measurement errors or mechanical loosening.
Install the sensor on a rigid, flat mounting surface with proper surface preparation. Poor mounting contact reduces vibration transmission accuracy.
Apply specified torque of 4.5 N-m to ensure stable mechanical coupling without overstressing the stud interface. Over-torque may damage threads or distort sensor alignment.
Route signal cables away from high power drives and variable frequency drives to reduce electromagnetic interference. Proper shielding improves long-term signal stability in noisy environments.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Color pattern |
Silver
|
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implementa un circuito luminoso XOR con 3 interruttori SPST in LogixPro o RSLogix 500 utilizzando un bit di relè interno. Include tabelle della verità, equazioni booleane e verifica.
Integra Allen-Bradley CompactLogix, Caterpillar ATS e generatori nel DCS DeltaV tramite Modbus RTU. Include i gateway ProSoft MVI69-MCM e Miille DIN266.
L’istruzione ONS si attiva, ma la bobina OTE non rimane mai eccitata in Studio 5000 perché il one-shot è vero solo per una scansione. Usa OTL/OTU oppure una logica di autoritenuta.
Configura i servoazionamenti Allen-Bradley Kinetix 5500 su EtherNet/IP. Include CIP Sync, la temporizzazione IEEE 1588 V2, la selezione degli switch Stratix, la topologia DLR e l’HMI.
