330130-040-00-05 specifies this 3300 XL Standard Extension Cable configuration with a length of 4.0 meters (13.1 feet), a standard non-armored FEP cable design, and CSA, ATEX, and IECEx hazardous area approvals. This coaxial cable operates as a matching electrical transmission line to connect a 3300 XL 8 mm proximity probe to its corresponding Proximitor sensor, completing a high-precision proximity transducer circuit for non-contact shaft vibration and displacement monitoring.
Selecting the non-armored Option 00 configuration provides a lighter, more flexible cable path with a reduced maximum outer diameter of 3.7 mm, allowing for easier routing through standard protective conduit. Unlike armored variants designed for direct exposure to abrasive environments, this option relies on external conduit or cable trays for mechanical protection while maintaining the same premium electrical characteristics and gold-plated ClickLoc connector interface.
Used for machinery vibration, axial position, and shaft keyphase measurement on critical industrial rotating machinery. This cable is typically installed in power generation plants, oil and gas processing facilities, and chemical plants on steam turbines, gas turbines, centrifugal compressors, industrial pumps, and large electric motors where hazardous area certifications are required.
| Option / Segment | Code on This SKU | Meaning / Description |
|---|---|---|
| Orderable Part Number | 330130-040-00-05 | 3300 XL Standard Extension Cable |
| Segment AAA - Cable Length Option | 040 | 4.0 meters (13.1 feet) |
| Segment BB - Connector Protector and Cable Option | 00 | Standard cable (non-armored, no connector protector) |
| Segment CC - Agency Approval Option | 05 | CSA, ATEX, IECEx Approvals |
| Manufacturer | Bently Nevada |
| Part Number / Model | 330130-040-00-05 |
| Product Family | 3300 XL Transducer System |
| Cable Type | Triaxial coaxial, non-armored |
| Cable Length | 4.0 meters (13.1 feet) |
| Cable Outer Diameter | 3.7 mm (0.15 in) maximum |
| Connector Outer Diameter | 7.24 mm (0.285 in) maximum |
| Core Resistance (RCORE) | 0.88 plus-minus 0.13 ohms |
| Jacket Resistance (RJACKET) | 0.26 plus-minus 0.05 ohms |
| Capacitance | 69.9 pF/m (21.3 pF/ft) typical |
| Insulation Material | Fluorinated Ethylene Propylene (FEP) |
| Connector Material | Gold-plated brass or gold-plated beryllium copper |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Dimensions | 200 mm x 200 mm x 30 mm (H x W x D) (coiled) |
| Weight | 0.136 kg (136 g) |
| Connector Side | Connector Type | Connection Target |
|---|---|---|
| Probe Side Connector | Miniature male coaxial ClickLoc | 3300 XL 8 mm Proximity Probe female connector |
| Proximitor Side Connector | Miniature female coaxial ClickLoc | 3300 XL Proximitor Sensor male connector |
Ensure the extension cable length combined with the proximity probe length matches the total calibrated length of the Proximitor sensor (typically 5.0 meters or 9.0 meters total system length). Connectors must be kept clean, dry, and free of oil during assembly. Tighten connections finger-tight. Slide a protective connector sleeve or apply silicone self-fusing tape over the connection to provide environmental sealing when installed in harsh environments.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330130-040-00-05
Country of origin:United States
Product Type: 3300 XL Standard Extension Cable
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 136g
Dimensions: 200 mm x 200 mm x 30 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330130-040-00-05 specifies this 3300 XL Standard Extension Cable configuration with a length of 4.0 meters (13.1 feet), a standard non-armored FEP cable design, and CSA, ATEX, and IECEx hazardous area approvals. This coaxial cable operates as a matching electrical transmission line to connect a 3300 XL 8 mm proximity probe to its corresponding Proximitor sensor, completing a high-precision proximity transducer circuit for non-contact shaft vibration and displacement monitoring.
Selecting the non-armored Option 00 configuration provides a lighter, more flexible cable path with a reduced maximum outer diameter of 3.7 mm, allowing for easier routing through standard protective conduit. Unlike armored variants designed for direct exposure to abrasive environments, this option relies on external conduit or cable trays for mechanical protection while maintaining the same premium electrical characteristics and gold-plated ClickLoc connector interface.
Used for machinery vibration, axial position, and shaft keyphase measurement on critical industrial rotating machinery. This cable is typically installed in power generation plants, oil and gas processing facilities, and chemical plants on steam turbines, gas turbines, centrifugal compressors, industrial pumps, and large electric motors where hazardous area certifications are required.
| Option / Segment | Code on This SKU | Meaning / Description |
|---|---|---|
| Orderable Part Number | 330130-040-00-05 | 3300 XL Standard Extension Cable |
| Segment AAA - Cable Length Option | 040 | 4.0 meters (13.1 feet) |
| Segment BB - Connector Protector and Cable Option | 00 | Standard cable (non-armored, no connector protector) |
| Segment CC - Agency Approval Option | 05 | CSA, ATEX, IECEx Approvals |
| Manufacturer | Bently Nevada |
| Part Number / Model | 330130-040-00-05 |
| Product Family | 3300 XL Transducer System |
| Cable Type | Triaxial coaxial, non-armored |
| Cable Length | 4.0 meters (13.1 feet) |
| Cable Outer Diameter | 3.7 mm (0.15 in) maximum |
| Connector Outer Diameter | 7.24 mm (0.285 in) maximum |
| Core Resistance (RCORE) | 0.88 plus-minus 0.13 ohms |
| Jacket Resistance (RJACKET) | 0.26 plus-minus 0.05 ohms |
| Capacitance | 69.9 pF/m (21.3 pF/ft) typical |
| Insulation Material | Fluorinated Ethylene Propylene (FEP) |
| Connector Material | Gold-plated brass or gold-plated beryllium copper |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Dimensions | 200 mm x 200 mm x 30 mm (H x W x D) (coiled) |
| Weight | 0.136 kg (136 g) |
| Connector Side | Connector Type | Connection Target |
|---|---|---|
| Probe Side Connector | Miniature male coaxial ClickLoc | 3300 XL 8 mm Proximity Probe female connector |
| Proximitor Side Connector | Miniature female coaxial ClickLoc | 3300 XL Proximitor Sensor male connector |
Ensure the extension cable length combined with the proximity probe length matches the total calibrated length of the Proximitor sensor (typically 5.0 meters or 9.0 meters total system length). Connectors must be kept clean, dry, and free of oil during assembly. Tighten connections finger-tight. Slide a protective connector sleeve or apply silicone self-fusing tape over the connection to provide environmental sealing when installed in harsh environments.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Sostituire un 1756-L73 non significa automaticamente aggiornare il firmware. Questa guida confronta le versioni 19.013, 21.011 e 31.011, concentrandosi sulla compatibilità dei progetti, sulle...
Implementa un circuito luminoso XOR con 3 interruttori SPST in LogixPro o RSLogix 500 utilizzando un bit di relè interno. Include tabelle della verità, equazioni booleane e verifica.
Integra Allen-Bradley CompactLogix, Caterpillar ATS e generatori nel DCS DeltaV tramite Modbus RTU. Include i gateway ProSoft MVI69-MCM e Miille DIN266.
L’istruzione ONS si attiva, ma la bobina OTE non rimane mai eccitata in Studio 5000 perché il one-shot è vero solo per una scansione. Usa OTL/OTU oppure una logica di autoritenuta.
Configura i servoazionamenti Allen-Bradley Kinetix 5500 su EtherNet/IP. Include CIP Sync, la temporizzazione IEEE 1588 V2, la selezione degli switch Stratix, la topologia DLR e l’HMI.
