Option 080 (8.0 metres cable length) and Option 25 (Armored High Temperature FluidLoc cable with stainless steel armor) specify this specific configuration of the Bently Nevada 3300 XL 25 mm extension cable — 330854-080-25-00.
Compared to unarmored variants (such as Option 24), this cable features flexible AISI 302 stainless steel armor wrapped around a 75-ohm triaxial FluidLoc coaxial cable with a PFA outer jacket. It is designed to extend the reach of 3300 XL 25 mm proximity probe systems where heavy-duty physical shielding is necessary to resist mechanical cuts, abrasion, and environmental moisture. The 8.0-metre cable length is configured to match standard 9.0-metre Proximitor Sensor system lengths when paired with a 1.0-metre probe.
| Option Segment | Code Value | Segment Meaning |
|---|---|---|
| Orderable Part Number | 330854-080-25-00 | 3300 XL 25 mm Extension Cable, Armored |
| A: Cable Length Option | 080 | 8.0 metres (26.2 feet) |
| B: Armor and Cable Option | 25 | Armored High Temperature FluidLoc cable |
| C: Agency Approval Option | 00 | No Approvals |
| Parameter / Specification | Value / Range |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330854-080-25-00 |
| System Compatibility | 3300 XL 25 mm Proximity Transducer System (330850, 330851) |
| Cable Construction | 75 ohm triaxial, perfluoroalkoxyethylene (PFA) insulated FluidLoc cable |
| Armor Material | Flexible AISI 302 stainless steel (SST) with protective PFA outer jacket |
| Cable Length | 8.0 m (26.2 ft) |
| Operating and Storage Temperature | -35 degC to +200 degC (-31 degF to +392 degF) |
| Relative Humidity | 100% condensing, non-submersible (with protected connectors) |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum) | 270 N (60 lb) at probe lead to extension cable connectors |
| Connector Material | Gold-plated brass and gold-plated beryllium copper |
| Cable Capacitance (Typical) | 69.9 pF/m (21.3 pF/ft) |
| dc Resistance (Center Conductor) | 2.0 +/- 0.5 ohms (8.0 m length) |
| dc Resistance (Coaxial Conductor) | 0.6 +/- 0.2 ohms (8.0 m length) |
| Connector Torque (Recommended) | Finger tight (0.565 N-m / 5 in-lb maximum torque) |
| Connector End | Connector Style | Target Connection Interface |
|---|---|---|
| Connector A (Source) | ClickLoc Miniature Male Coaxial | Mates with 3300 XL 25 mm Proximitor Sensor terminal connection |
| Connector B (Destination) | ClickLoc Miniature Female Coaxial | Mates with 3300 XL 25 mm Proximity Probe lead connection |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330854-080-25-00
Country of origin:United States
Product Type: 3300 XL 25 mm Extension Cable
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 350g
Dimensions: 70 mm x 120 mm x 120 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 080 (8.0 metres cable length) and Option 25 (Armored High Temperature FluidLoc cable with stainless steel armor) specify this specific configuration of the Bently Nevada 3300 XL 25 mm extension cable — 330854-080-25-00.
Compared to unarmored variants (such as Option 24), this cable features flexible AISI 302 stainless steel armor wrapped around a 75-ohm triaxial FluidLoc coaxial cable with a PFA outer jacket. It is designed to extend the reach of 3300 XL 25 mm proximity probe systems where heavy-duty physical shielding is necessary to resist mechanical cuts, abrasion, and environmental moisture. The 8.0-metre cable length is configured to match standard 9.0-metre Proximitor Sensor system lengths when paired with a 1.0-metre probe.
| Option Segment | Code Value | Segment Meaning |
|---|---|---|
| Orderable Part Number | 330854-080-25-00 | 3300 XL 25 mm Extension Cable, Armored |
| A: Cable Length Option | 080 | 8.0 metres (26.2 feet) |
| B: Armor and Cable Option | 25 | Armored High Temperature FluidLoc cable |
| C: Agency Approval Option | 00 | No Approvals |
| Parameter / Specification | Value / Range |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330854-080-25-00 |
| System Compatibility | 3300 XL 25 mm Proximity Transducer System (330850, 330851) |
| Cable Construction | 75 ohm triaxial, perfluoroalkoxyethylene (PFA) insulated FluidLoc cable |
| Armor Material | Flexible AISI 302 stainless steel (SST) with protective PFA outer jacket |
| Cable Length | 8.0 m (26.2 ft) |
| Operating and Storage Temperature | -35 degC to +200 degC (-31 degF to +392 degF) |
| Relative Humidity | 100% condensing, non-submersible (with protected connectors) |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum) | 270 N (60 lb) at probe lead to extension cable connectors |
| Connector Material | Gold-plated brass and gold-plated beryllium copper |
| Cable Capacitance (Typical) | 69.9 pF/m (21.3 pF/ft) |
| dc Resistance (Center Conductor) | 2.0 +/- 0.5 ohms (8.0 m length) |
| dc Resistance (Coaxial Conductor) | 0.6 +/- 0.2 ohms (8.0 m length) |
| Connector Torque (Recommended) | Finger tight (0.565 N-m / 5 in-lb maximum torque) |
| Connector End | Connector Style | Target Connection Interface |
|---|---|---|
| Connector A (Source) | ClickLoc Miniature Male Coaxial | Mates with 3300 XL 25 mm Proximitor Sensor terminal connection |
| Connector B (Destination) | ClickLoc Miniature Female Coaxial | Mates with 3300 XL 25 mm Proximity Probe lead connection |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
