Option 00 (0.0 in unthreaded length) and Option 60 (6.0 in overall case length) specify this stainless-steel armored 1/4-28 UNF threaded configuration — 330902-00-60-10-02-05 3300 NSv proximity probe.
This transducer probe is armored with stainless steel to protect the FEP-insulated coaxial cable from mechanical wear and abrasion in demanding industrial areas, separating it from the standard unarmored 330901 variant. Featuring a 1.0 m (39 in) total probe length and a miniature coaxial ClickLoc connector, this configuration is optimized for tight-clearance, small-bore rotating machinery installations requiring multi-agency hazardous area approvals (Option 05).
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Base Model | 330902 | 3300 NSv Probe, 1/4-28 UNF-2A thread, with stainless steel armor |
| A - Unthreaded Length Option | 00 | 0.0 in unthreaded length |
| B - Overall Case Length Option | 60 | 6.0 in overall case length |
| C - Total Length Option | 10 | 1.0 meter (39 in) total length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 05 | Multiple Approvals (including CSA, ATEX, and IECEx) |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330902-00-60-10-02-05 |
| Transducer System | 3300 XL NSv Proximity Transducer System |
| Probe Thread Type | 1/4-28 UNF-2A (English thread) |
| Mechanical Protection | Flexible AISI 302 stainless steel armor |
| Unthreaded Length (Option A) | 0.0 in |
| Overall Case Length (Option B) | 6.0 in |
| Total Probe Length (Option C) | 1.0 meter (39 in) |
| Connector Type (Option D) | Miniature coaxial ClickLoc connector |
| Cable Type | 75 ohm coaxial, fluoroethylene propylene (FEP) insulated |
| Agency Approvals (Option E) | Multiple Approvals (including CSA, ATEX, and IECEx) |
| Average Scale Factor (ASF) | 7.87 V/mm (200 mV/mil) |
| Linear Range | 1.5 mm (60 mils), spanning from 0.25 to 1.75 mm (10 to 70 mils) |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +12.5% / -20% over ambient range |
| Deviation from Best Fit Straight Line (DSL) | Less than +/- 0.06 mm (+/- 2.3 mils) |
| Frequency Response | 0 to 10 kHz; +0, -3 dB typical |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +351 degF) |
| Relative Humidity | 100% condensing, non-submersible (when connectors are protected) |
| Probe Pressure Seal | Differential pressure seal utilizing a Viton O-ring |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum Rated) | 220 N (50 lb) case-to-lead, lead-to-connector, and case-to-armor |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330902-00-60-10-02-05
Country of origin:United States
Product Type: Sonde di prossimità 3300 NSv
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 00 (0.0 in unthreaded length) and Option 60 (6.0 in overall case length) specify this stainless-steel armored 1/4-28 UNF threaded configuration — 330902-00-60-10-02-05 3300 NSv proximity probe.
This transducer probe is armored with stainless steel to protect the FEP-insulated coaxial cable from mechanical wear and abrasion in demanding industrial areas, separating it from the standard unarmored 330901 variant. Featuring a 1.0 m (39 in) total probe length and a miniature coaxial ClickLoc connector, this configuration is optimized for tight-clearance, small-bore rotating machinery installations requiring multi-agency hazardous area approvals (Option 05).
| Option / Segment | Code on This SKU | Description |
|---|---|---|
| Base Model | 330902 | 3300 NSv Probe, 1/4-28 UNF-2A thread, with stainless steel armor |
| A - Unthreaded Length Option | 00 | 0.0 in unthreaded length |
| B - Overall Case Length Option | 60 | 6.0 in overall case length |
| C - Total Length Option | 10 | 1.0 meter (39 in) total length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 05 | Multiple Approvals (including CSA, ATEX, and IECEx) |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330902-00-60-10-02-05 |
| Transducer System | 3300 XL NSv Proximity Transducer System |
| Probe Thread Type | 1/4-28 UNF-2A (English thread) |
| Mechanical Protection | Flexible AISI 302 stainless steel armor |
| Unthreaded Length (Option A) | 0.0 in |
| Overall Case Length (Option B) | 6.0 in |
| Total Probe Length (Option C) | 1.0 meter (39 in) |
| Connector Type (Option D) | Miniature coaxial ClickLoc connector |
| Cable Type | 75 ohm coaxial, fluoroethylene propylene (FEP) insulated |
| Agency Approvals (Option E) | Multiple Approvals (including CSA, ATEX, and IECEx) |
| Average Scale Factor (ASF) | 7.87 V/mm (200 mV/mil) |
| Linear Range | 1.5 mm (60 mils), spanning from 0.25 to 1.75 mm (10 to 70 mils) |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +12.5% / -20% over ambient range |
| Deviation from Best Fit Straight Line (DSL) | Less than +/- 0.06 mm (+/- 2.3 mils) |
| Frequency Response | 0 to 10 kHz; +0, -3 dB typical |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +351 degF) |
| Relative Humidity | 100% condensing, non-submersible (when connectors are protected) |
| Probe Pressure Seal | Differential pressure seal utilizing a Viton O-ring |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum Rated) | 220 N (50 lb) case-to-lead, lead-to-connector, and case-to-armor |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implementa un circuito luminoso XOR con 3 interruttori SPST in LogixPro o RSLogix 500 utilizzando un bit di relè interno. Include tabelle della verità, equazioni booleane e verifica.
Integra Allen-Bradley CompactLogix, Caterpillar ATS e generatori nel DCS DeltaV tramite Modbus RTU. Include i gateway ProSoft MVI69-MCM e Miille DIN266.
L’istruzione ONS si attiva, ma la bobina OTE non rimane mai eccitata in Studio 5000 perché il one-shot è vero solo per una scansione. Usa OTL/OTU oppure una logica di autoritenuta.
Configura i servoazionamenti Allen-Bradley Kinetix 5500 su EtherNet/IP. Include CIP Sync, la temporizzazione IEEE 1588 V2, la selezione degli switch Stratix, la topologia DLR e l’HMI.
