330905-00-05-10-12-CN: 3300 NSv proximity probe, configured with 0.0 in unthreaded length (Option 00), 0.5 in case length (Option 05), 1.0 m total length (Option 10), and connector/cable Option 12. This transducer includes the -CN suffix, signifying inclusion of the China hazardous area approval package (NEPSI/CCC). This eddy-current probe is designed for use within the 3300 XL NSv proximity transducer system to provide precise non-contact displacement measurements.
The 3300 NSv system is engineered for machinery where target area or installation space is restricted, such as small-bore rotating equipment or aeroderivative turbines. Option 12 specifies the use of FluidLoc cable, which provides enhanced protection against fluid ingress in demanding process environments. The probe features an M10x1 thread and is provided without integrated armor, allowing for flexible routing in tight terminal boxes or machinery housings.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330905-00-05-10-12-CN | 3300 NSv Proximity Probe, M10x1 |
| A - Unthreaded Length | 00 | 0.0 in unthreaded length |
| B - Case Length | 05 | 0.5 in case length |
| C - Total Length | 10 | 1.0 m total length |
| D - Connector/Cable | 12 | Miniature coaxial ClickLoc, FluidLoc cable |
| Suffix -CN | -CN | China hazardous area approval package (NEPSI/CCC) |
| Manufacturer | Bently Nevada |
| Part Number | 330905-00-05-10-12-CN |
| Probe Diameter | M10x1 thread |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Cable Type | 75 Ohm FluidLoc coaxial cable |
| Connector Type | Miniature coaxial ClickLoc |
| Operating Temperature | -52 degC to +177 degC |
| Storage Temperature | -52 degC to +177 degC |
| Relative Humidity | 100 percent condensing, non-submersible |
| Agency Approvals | NEPSI, CCC (per -CN suffix) |
Ensure the probe tip is installed with the specified air gap as defined in the 3300 XL NSv manual. Use connector protectors on all probe-to-extension cable connections to prevent fluid ingress. While the probe is chemically resistant, avoid overtightening the housing to prevent damage to the pressure seal or threads. The ClickLoc connector should be engaged until it locks to ensure signal integrity.
This unit includes the -CN suffix, which mandates compliance with China hazardous area requirements, including NEPSI and CCC markings. Ensure the installation meets the specific safety drawing requirements for hazardous area classifications when used in potentially explosive atmospheres.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330905-00-05-10-12-CN
Country of origin:United States
Product Type: 3300 NSv Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330905-00-05-10-12-CN: 3300 NSv proximity probe, configured with 0.0 in unthreaded length (Option 00), 0.5 in case length (Option 05), 1.0 m total length (Option 10), and connector/cable Option 12. This transducer includes the -CN suffix, signifying inclusion of the China hazardous area approval package (NEPSI/CCC). This eddy-current probe is designed for use within the 3300 XL NSv proximity transducer system to provide precise non-contact displacement measurements.
The 3300 NSv system is engineered for machinery where target area or installation space is restricted, such as small-bore rotating equipment or aeroderivative turbines. Option 12 specifies the use of FluidLoc cable, which provides enhanced protection against fluid ingress in demanding process environments. The probe features an M10x1 thread and is provided without integrated armor, allowing for flexible routing in tight terminal boxes or machinery housings.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330905-00-05-10-12-CN | 3300 NSv Proximity Probe, M10x1 |
| A - Unthreaded Length | 00 | 0.0 in unthreaded length |
| B - Case Length | 05 | 0.5 in case length |
| C - Total Length | 10 | 1.0 m total length |
| D - Connector/Cable | 12 | Miniature coaxial ClickLoc, FluidLoc cable |
| Suffix -CN | -CN | China hazardous area approval package (NEPSI/CCC) |
| Manufacturer | Bently Nevada |
| Part Number | 330905-00-05-10-12-CN |
| Probe Diameter | M10x1 thread |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Cable Type | 75 Ohm FluidLoc coaxial cable |
| Connector Type | Miniature coaxial ClickLoc |
| Operating Temperature | -52 degC to +177 degC |
| Storage Temperature | -52 degC to +177 degC |
| Relative Humidity | 100 percent condensing, non-submersible |
| Agency Approvals | NEPSI, CCC (per -CN suffix) |
Ensure the probe tip is installed with the specified air gap as defined in the 3300 XL NSv manual. Use connector protectors on all probe-to-extension cable connections to prevent fluid ingress. While the probe is chemically resistant, avoid overtightening the housing to prevent damage to the pressure seal or threads. The ClickLoc connector should be engaged until it locks to ensure signal integrity.
This unit includes the -CN suffix, which mandates compliance with China hazardous area requirements, including NEPSI and CCC markings. Ensure the installation meets the specific safety drawing requirements for hazardous area classifications when used in potentially explosive atmospheres.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Sostituire un 1756-L73 non significa automaticamente aggiornare il firmware. Questa guida confronta le versioni 19.013, 21.011 e 31.011, concentrandosi sulla compatibilità dei progetti, sulle...
Implementa un circuito luminoso XOR con 3 interruttori SPST in LogixPro o RSLogix 500 utilizzando un bit di relè interno. Include tabelle della verità, equazioni booleane e verifica.
Integra Allen-Bradley CompactLogix, Caterpillar ATS e generatori nel DCS DeltaV tramite Modbus RTU. Include i gateway ProSoft MVI69-MCM e Miille DIN266.
L’istruzione ONS si attiva, ma la bobina OTE non rimane mai eccitata in Studio 5000 perché il one-shot è vero solo per una scansione. Usa OTL/OTU oppure una logica di autoritenuta.
Configura i servoazionamenti Allen-Bradley Kinetix 5500 su EtherNet/IP. Include CIP Sync, la temporizzazione IEEE 1588 V2, la selezione degli switch Stratix, la topologia DLR e l’HMI.
