Engineered for precise speed and torque regulation of three-phase asynchronous motors, the Lenze E82EV752_4C040 frequency inverter serves as a core control component within the 8200 Vector series. This modular drive is designed to optimize energy consumption and mechanical wear across diverse industrial drive architectures, offering robust performance under varying load conditions.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Lenze |
| Model Code | E82EV752_4C040 (E82EV752K4C040) |
| Product Series | 8200 Vector |
| Rated Power Output | 7.5 kW |
| Input Voltage Range | 3-Phase 400V to 500V AC |
| Product Phase | Phase-Out (Legacy Support Available) |
| Commodity Code | 85044090 |
| Export Control Classification (ECCN) | N |
| Country of Origin | Germany |
| Shipping Weight (Calculated) | 3.82 kg |
| Package Dimensions (Calculated) | 15.00 x 6.00 x 10.00 cm |
The E82EV752_4C040 is fully compatible with other 8200 Vector drives of the same frame size. When replacing legacy units, ensure that the plug-in function module (such as the standard I/O module or fieldbus interface card) is transferred to the new drive, as base units are shipped without control terminals.
In enclosed control cabinets, this 7.5 kW unit generates significant thermal dissipation. Maintain a minimum vertical clearance of 100 mm above and below the chassis to prevent overtemperature faults (fault code OH). If operating continuously at 500V AC, verify that the motor insulation class is rated for high-peak voltage reflections.
Always utilize low-capacitance, shielded motor cables. The shield must be grounded with a large surface area contact directly at the drive's functional earth plate to prevent high-frequency leakage currents from disrupting nearby analog instrumentation.
CRITICAL WARNING
Isolate all electrical power sources before commencing installation. Wait a minimum of 5 minutes after complete de-energization to allow the internal DC-bus capacitors to discharge to safe voltage levels (< 50 VDC) before touching terminals.
Global Express Shipping
Returns & Warranty
Manufacturer: Lenze
Product No.: E82EV752_4C040
Country of origin:Germany
Product Type: Variable Frequency Drives
Barcode: 85044090
Payment: T/T, Western Union
Weight: 3820g
Dimensions: 15.00 x 6.00 x 10.00 cm
Shipping port: Xiamen
Warranty: 12 months
Engineered for precise speed and torque regulation of three-phase asynchronous motors, the Lenze E82EV752_4C040 frequency inverter serves as a core control component within the 8200 Vector series. This modular drive is designed to optimize energy consumption and mechanical wear across diverse industrial drive architectures, offering robust performance under varying load conditions.
| Parameter | Specification Value |
|---|---|
| Manufacturer | Lenze |
| Model Code | E82EV752_4C040 (E82EV752K4C040) |
| Product Series | 8200 Vector |
| Rated Power Output | 7.5 kW |
| Input Voltage Range | 3-Phase 400V to 500V AC |
| Product Phase | Phase-Out (Legacy Support Available) |
| Commodity Code | 85044090 |
| Export Control Classification (ECCN) | N |
| Country of Origin | Germany |
| Shipping Weight (Calculated) | 3.82 kg |
| Package Dimensions (Calculated) | 15.00 x 6.00 x 10.00 cm |
The E82EV752_4C040 is fully compatible with other 8200 Vector drives of the same frame size. When replacing legacy units, ensure that the plug-in function module (such as the standard I/O module or fieldbus interface card) is transferred to the new drive, as base units are shipped without control terminals.
In enclosed control cabinets, this 7.5 kW unit generates significant thermal dissipation. Maintain a minimum vertical clearance of 100 mm above and below the chassis to prevent overtemperature faults (fault code OH). If operating continuously at 500V AC, verify that the motor insulation class is rated for high-peak voltage reflections.
Always utilize low-capacitance, shielded motor cables. The shield must be grounded with a large surface area contact directly at the drive's functional earth plate to prevent high-frequency leakage currents from disrupting nearby analog instrumentation.
CRITICAL WARNING
Isolate all electrical power sources before commencing installation. Wait a minimum of 5 minutes after complete de-energization to allow the internal DC-bus capacitors to discharge to safe voltage levels (< 50 VDC) before touching terminals.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
