Engineered for highly dynamic machine control and precise speed regulation, the Omron 3G3MX2-A4015-ZV1 serves as a high-torque multi-function compact inverter from the renowned MX2 Series. Designed to integrate directly into complex automation systems, this variable frequency drive utilizes advanced sensorless vector control algorithms to achieve up to 200 percent starting torque at 0.5 Hz, making it exceptionally reliable for high-inertia start-up loads. Equipped with a dual rating system, it allows operators to configure the drive for either heavy-duty Constant Torque (CT) or normal-duty Variable Torque (VT) operations, optimizing cost and physical footprint within control enclosures.
| Parameter | Value |
|---|---|
| Manufacturer | Omron |
| Model Code | 3G3MX2-A4015-ZV1 |
| Product Series | MX2 Series V2.1 / ZV1 Revision |
| Input Voltage Class | 3-phase 380 to 480 VAC (+10% / -15%), 50/60 Hz (+/-5%) |
| Motor Capacity (Heavy Duty - CT) | 1.5 kW |
| Motor Capacity (Normal Duty - VT) | 2.2 kW |
| Rated Output Current (CT) | 4.1 A |
| Rated Output Current (VT) | 4.8 A |
| Enclosure Protection Rating | IP20 (Panel Mounting Type) |
| Control Method | Phase-to-phase sinusoidal PWM (V/f control, Sensorless Vector) |
| Ambient Operating Temperature | -10 to +50 degC (Without derating) |
| Net Physical Weight | 1.8 kg |
| Shipping Weight (Calculated) | 4.0 kg |
Alternative Models & Compatibility: The "-ZV1" suffix indicates an updated, firmware-enhanced model that complies fully with modernized European and North American safety profiles and improves parameter replication. It is fully backwards-compatible with older, legacy non-ZV1 3G3MX2-A4015 systems, allowing for drop-in physical and logical replacement in established control panels.
Application Pitfalls & Engineering Notes: When operating the drive in a sealed enclosure under high-ambient plant environments (approaching 50 degC), derating calculations must be carefully evaluated. Maintain a minimum of 100 mm top and bottom clearance to avoid local thermal traps. For continuous heavy cyclical start-stop profiles, external dynamic braking resistors are highly recommended to prevent overvoltage trips (DC bus overvoltage errors) during sudden deceleration phases.
Commissioning & Wiring Tips: To meet EMC directive requirements, motor cables must be fully shielded, with the shielding grounded securely at both the motor housing and the drive panel chassis. When routing analog control signals (e.g., 4-20 mA or 0-10 V for speed reference), ensure cables are run in a separate conduit from high-voltage input and output power feeds to prevent electromagnetic noise coupling.
CRITICAL WARNING:
Ensure all main power sources (L1, L2, L3) are locked out and tagged out prior to making physical connections. Wait a minimum of 10 minutes after disconnecting power for internal capacitors to fully discharge. Always verify that the DC bus voltage across terminals P/+ and N/- has dropped below 50 VDC using a certified multimeter before handling drive wiring.
Mount the inverter vertically to a rigid, flat metal backplate using the integrated mounting brackets to maximize heat dissipation.
Connect incoming 3-phase power line wiring to terminals L1, L2, and L3. Connect the three motor power leads to terminals U, V, and W.
Establish protective ground connections at the ground terminal. Ensure connection resistance is under 10 ohms (Class D grounding).
Apply power and use the digital operator panel or CX-Drive software to set critical motor parameters, including rated current, base frequency, and control selection mode.
Global Express Shipping
Returns & Warranty
Manufacturer: Omron
Product No.: 3G3MX2-A4015-ZV1
Country of origin:Japan
Product Type: Variable Frequency Drives
Payment: T/T, Western Union
Weight: 4000g
Shipping port: Xiamen
Warranty: 12 months
Engineered for highly dynamic machine control and precise speed regulation, the Omron 3G3MX2-A4015-ZV1 serves as a high-torque multi-function compact inverter from the renowned MX2 Series. Designed to integrate directly into complex automation systems, this variable frequency drive utilizes advanced sensorless vector control algorithms to achieve up to 200 percent starting torque at 0.5 Hz, making it exceptionally reliable for high-inertia start-up loads. Equipped with a dual rating system, it allows operators to configure the drive for either heavy-duty Constant Torque (CT) or normal-duty Variable Torque (VT) operations, optimizing cost and physical footprint within control enclosures.
| Parameter | Value |
|---|---|
| Manufacturer | Omron |
| Model Code | 3G3MX2-A4015-ZV1 |
| Product Series | MX2 Series V2.1 / ZV1 Revision |
| Input Voltage Class | 3-phase 380 to 480 VAC (+10% / -15%), 50/60 Hz (+/-5%) |
| Motor Capacity (Heavy Duty - CT) | 1.5 kW |
| Motor Capacity (Normal Duty - VT) | 2.2 kW |
| Rated Output Current (CT) | 4.1 A |
| Rated Output Current (VT) | 4.8 A |
| Enclosure Protection Rating | IP20 (Panel Mounting Type) |
| Control Method | Phase-to-phase sinusoidal PWM (V/f control, Sensorless Vector) |
| Ambient Operating Temperature | -10 to +50 degC (Without derating) |
| Net Physical Weight | 1.8 kg |
| Shipping Weight (Calculated) | 4.0 kg |
Alternative Models & Compatibility: The "-ZV1" suffix indicates an updated, firmware-enhanced model that complies fully with modernized European and North American safety profiles and improves parameter replication. It is fully backwards-compatible with older, legacy non-ZV1 3G3MX2-A4015 systems, allowing for drop-in physical and logical replacement in established control panels.
Application Pitfalls & Engineering Notes: When operating the drive in a sealed enclosure under high-ambient plant environments (approaching 50 degC), derating calculations must be carefully evaluated. Maintain a minimum of 100 mm top and bottom clearance to avoid local thermal traps. For continuous heavy cyclical start-stop profiles, external dynamic braking resistors are highly recommended to prevent overvoltage trips (DC bus overvoltage errors) during sudden deceleration phases.
Commissioning & Wiring Tips: To meet EMC directive requirements, motor cables must be fully shielded, with the shielding grounded securely at both the motor housing and the drive panel chassis. When routing analog control signals (e.g., 4-20 mA or 0-10 V for speed reference), ensure cables are run in a separate conduit from high-voltage input and output power feeds to prevent electromagnetic noise coupling.
CRITICAL WARNING:
Ensure all main power sources (L1, L2, L3) are locked out and tagged out prior to making physical connections. Wait a minimum of 10 minutes after disconnecting power for internal capacitors to fully discharge. Always verify that the DC bus voltage across terminals P/+ and N/- has dropped below 50 VDC using a certified multimeter before handling drive wiring.
Mount the inverter vertically to a rigid, flat metal backplate using the integrated mounting brackets to maximize heat dissipation.
Connect incoming 3-phase power line wiring to terminals L1, L2, and L3. Connect the three motor power leads to terminals U, V, and W.
Establish protective ground connections at the ground terminal. Ensure connection resistance is under 10 ohms (Class D grounding).
Apply power and use the digital operator panel or CX-Drive software to set critical motor parameters, including rated current, base frequency, and control selection mode.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Japan
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
