Description

The 6AV7611-0AF10-0BJ0 is a SIMATIC Panel PC 670 from Siemens, designed for industrial human-machine interface (HMI) and control applications. This unit features a 10-inch TFT display and is configured with a 300 MHz Celeron CPU, 64 MB of RAM, a 40 GB hard drive, and an integrated CD-ROM drive. It is supplied with the Windows NT 4.0 English operating system pre-installed and includes a U.S. mains cable for its 115-230V AC power supply. Please note that this product is considered obsolete by the manufacturer, making it a suitable spare part for maintaining existing systems.

Features

• ▪ 10-inch TFT color display for process visualization.
• ▪ Powered by a 300 MHz Intel Celeron processor.
• ▪ Equipped with 64 MB of RAM for application support.
• ▪ Includes a 40 GB hard drive and a CD-ROM drive for data storage and software installation.
• ▪ Pre-installed with Windows NT 4.0 (English version).
• ▪ Wide input voltage range of 115-230V AC.

Applications

• ▪ Legacy system maintenance and spare parts replacement.
• ▪ Operator control and monitoring stations.
• ▪ Machine-level data acquisition and visualization.
• ▪ Simple process control interfaces in manufacturing environments.

Technical Specifications

Installation Guidelines

1. 1 Panel Preparation: Ensure the mounting cutout in the enclosure is clean, free of burrs, and matches the PC's specified dimensions. Verify the panel surface is flat to ensure a proper seal.
2. 2 Mounting: Insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a cross-pattern to the manufacturer's recommended torque to ensure uniform gasket compression.
3. 3 Grounding: Connect the chassis ground terminal on the rear of the Panel PC to the enclosure's main protective earth (PE) bus bar using a low-impedance conductor. A secure ground connection is critical for safety and noise immunity.
4. 4 Power Connection: Connect the provided mains cable to the AC power inlet on the unit. Route the power cable away from high-noise sources and data cables. Ensure the source voltage matches the 115-230V AC rating.
5. 5 Final Checks: Before re-energizing the cabinet, verify all connections are secure and correctly terminated. Check for proper clearance around the unit for ventilation. Once confirmed, remove the lockout/tagout device and restore power to the system.