Bently Nevada 330104-00-08-10-02-00 3300 XL 8 mm Proximity Probe

Description

Option 00 (0 mm unthreaded length) and Option 08 (80 mm overall case length) specify this metric threaded, armored 3300 XL 8 mm proximity probe configuration — 330104-00-08-10-02-00.

Unlike the unarmored 330103 probe family, the 330104-00-08-10-02-00 features integral stainless steel armor protecting the entire length of the 1.0-meter coaxial cable. This specific configuration provides rugged mechanical protection for demanding industrial environments where debris or routing hazards could pinch or damage an unarmored cable, while utilizing an M10 x 1 metric thread instead of standard fractional threads.

Features

• Metric thread configuration featuring an M10 x 1 thread size and an 80 mm overall case length, fully threaded with 0 mm of unthreaded body length.
• Integral stainless steel armor sleeve with a 7.67 mm outside diameter to shield the 1.0-meter coaxial cable from physical damage.
• Standard coaxial cable configuration terminated with a miniature coaxial ClickLoc connector without a connector protector.
• Fully interchangeable and backward-compatible with older, non-XL Bently Nevada 3300-series transducer components.
• Robust PPS plastic molded probe tip designed to withstand extreme thermal and mechanical stresses in heavy industrial applications.

Applications

• Fluid-film bearing machines such as steam and gas turbines, centrifugal compressors, pumps, and generators.
• Shaft dynamic vibration measurements and static position monitoring.
• Keyphasor reference signals and high-precision rotational speed measurements.

Ordering Information

Technical Specifications

Installation Guidelines

• Do not exceed the maximum thread engagement of 15 mm for M10 x 1 threads during installation to prevent thread binding.
• Ensure the probe tip has appropriate side clearance (typically a minimum clearance diameter of 24 mm around the tip) to prevent cross-talk or false readings from surrounding metal.
• Ensure connectors are tightened finger-tight only. Do not use standard pliers on miniature coaxial ClickLoc connectors.
• Maintain a proper probe-to-target gap (typically 1.27 mm or 50 mils) corresponding to a nominal output of -10 Vdc on the Proximitor Sensor.

Compliance and Certifications

Agency Approvals: Option 00 (Not required). Designed to meet standard industrial CE requirements.