Manufacturer: Allen-Bradley
Product No.: 1734-IE2C
Country of origin:Singapore
Product Type: Analog Input Module
Payment: T/T, Western Union
Weight: 33g
Dimensions: 56.6 x 12.1 x 77.5 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
The 1734-IE2C is a 2-channel analog current input module designed for integration within the POINT I/O system architecture. The 1734-IE2C provides conversion of 4...20 mA and 0...20 mA field signals into 16-bit digital representation for process control systems. The unit sends 6 bytes of input data and fault status information across the backplane to the system controller, operating via DeviceNet, PROFIBUS, ControlNet, or EtherNet/IP adapters.
| Attribute | Specification |
|---|---|
| Manufacturer | Allen-Bradley / Rockwell Automation |
| Model | 1734-IE2C |
| Country of Origin | Singapore |
| Dimensions (H x W x D) | 56.6 x 12.1 x 77.5 mm (2.23 x 0.48 x 3.05 in.) |
| Weight | 33 g (1.16 oz.) |
| Number of Inputs | 2 single-ended, non-isolated, current |
| Input Current Range | 4...20 mA, 0...20 mA |
| Resolution | 16 bits - over 0...21 mA (0.32 uA/cnt) |
| Conversion Type | Delta Sigma |
| Input Impedance / Resistance | 160 ohms |
| Absolute Accuracy | 0.1% Full Scale @ 25 degC (77 degF) |
| Accuracy Drift with Temp | 30 ppm/degC |
| Digital Filter Time Constant | 0...10,000 ms (default = 0 ms) |
| Input Update Rate | 120 ms @ Notch = 50 Hz, 100 ms @ Notch = 60 Hz (default), 24 ms @ Notch = 250 Hz, 12 ms @ Notch = 500 Hz |
| Common Mode Rejection Ratio | 120 dB |
| Normal Mode Rejection Ratio | -60 dB |
| Maximum Overload | Fault protected to 28.8V DC |
| External DC Power Supply Voltage | 24V DC nominal (10...28.8V DC) |
| External DC Power Supply Current | 15 mA @ 24V DC |
| POINTBus Current (Max) | 75 mA @ 5V DC |
| Power Dissipation (Max) | 0.6 W @ 28.8V DC |
| Thermal Dissipation (Max) | 2.0 BTU/hr @ 28.8V DC |
| Isolation Voltage | 50V continuous (tested to withstand 2550V DC for 60 s) |
| Keyswitch Position | 3 |
| Terminal Base Screw Torque | 0.6 N-m (7 lb-in) |
| Wire Size | 0.25...2.5 mm2 (22...14 AWG) solid or stranded shielded copper wire rated at 75 degC or greater |
| Operating Temperature | -20 degC to +55 degC (-4 degF to +131 degF) |
| Storage Temperature | -40 degC to +85 degC (-40 degF to +185 degF) |
| Relative Humidity | 5...95% noncondensing |
| Terminal Pin | Function |
|---|---|
| 0 | Current Input Channel 0 (In 0) |
| 1 | Current Input Channel 1 (In 1) |
| 2 | Chassis Ground (Chas Gnd) |
| 3 | Chassis Ground (Chas Gnd) |
| 4 | Common (C) |
| 5 | Common (C) |
| 6 | 12/24V DC Supply (V) |
| 7 | 12/24V DC Supply (V) |
Global Express Shipping
Returns & Warranty
| Product Image | Model Number / Title | Condition | Availability | Action |
|---|---|---|---|---|
|
Allen-Bradley 1769-IF8 Compact I/O Analog Input Module | Original New | In Stock | View Details |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Singapore
|
Check 1771-IG TTL HIGH/LOW logic thresholds, field supply ripple and 1771-WC wiring before replacing an input module.
A field checklist for distinguishing Danfoss 060G2105, 060G1323 and 060G2109 by pressure range, fitting, loop signal and controller scaling.
A field checklist for separating 24 VDC input, carrier bus, output derating and alarm-contact faults before replacing an Emerson SE5009.
A controlled commissioning method for using the 140XSM00200 simulator to verify Modicon Quantum input mapping and interlocks before reconnecting field wiring.
A commissioning checklist for the ProSoft PLX32-EIP-MBTCP covering subnet separation, register contracts, EtherNet/IP timing, failure tests and replacement records.
A field checklist for IC693MDL916 relay commands, terminal blocks, load current, switching rate and contact-side measurements.
