Designed for direct installation inside compact control cabinets, the Beckhoff C6925-0020 industrial PC delivers robust processing capability in a passively cooled, space-saving format. This unit integrates a 3.5-inch motherboard with an Intel Celeron ULV processor to handle deterministic control tasks without the mechanical wear associated with cooling fans. Featuring a rugged aluminum housing, the Beckhoff C6925-0020 is built to withstand industrial environments while serving as an efficient control platform for TwinCAT-based applications.
| Manufacturer | Beckhoff Automation |
|---|---|
| Model / Article Number | C6925-0020 |
| Processor | Intel Celeron ULV 827E (1.4 GHz, 1 Core) |
| Motherboard Form Factor | 3.5-inch motherboard |
| TwinCAT Performance Class | TC2, TC3: 50 |
| Cooling Type | Passive (Fanless) |
| Primary Storage Slot | 1 x CFast slot |
| Expansion Slots | 2 x PCIe module slots (for Beckhoff PCIe modules) |
| Standard Interfaces | 4 x USB 2.0, 1 x DVI |
| Input Voltage | 24 V DC |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 55 degC |
| Dimensions (W x H x D) | 65 x 233 x 121 mm (without mounting plate) |
| Net Unit Weight | 1.7 kg (3.9 lbs) |
| Shipping Weight (Calculated) | 4.0 kg |
The C6925 series is a direct evolution of older Beckhoff cabinet IPC models. When replacing legacy C69xx units, ensure your current TwinCAT configuration maps correctly to the single-core Celeron architecture. For applications requiring multi-threaded tasks or heavier HMI load, verify CPU allocation limits prior to site commissioning.
Because this controller relies entirely on passive cooling, vertical installation is mandatory to encourage natural convective airflow. Mounting the IPC horizontally or reducing the clear envelope will restrict thermal dissipation, leading to automatic processor throttling or thermal safety shutdowns when ambient enclosure temperatures exceed 50 degC.
Always use a stabilized 24 V DC power supply. High ripple or transient voltage spikes on the primary DC bus can trigger hardware resets. If utilizing the optional UPS expansion, ensure the capacitive or battery storage system is fully calibrated within the operating software to allow safe state saves during unexpected power dropouts.
Mount the IPC vertically on the control cabinet wall using the pre-installed rear mounting plate. Ensure at least 5 cm (2 inches) of free air space above and below the device to permit unrestrained convective cooling.
Connect a functional earth ground directly to the low-resistance grounding bolt located on the chassis housing to minimize EMI and protect sensitive motherboard logic.
Insert the pre-configured CFast card containing the operating system and runtime binaries into the dedicated flash slot before applying primary system power.
Connect the 24 V DC power supply lines to the power terminal plug, checking correct polarity (+ / -) prior to switching on the supply.
Global Express Shipping
Returns & Warranty
Manufacturer: BECKHOFF
Product No.: C6925-0020
Country of origin:Germany
Product Type: Industrial PCs
Payment: T/T, Western Union
Weight: 4000g
Dimensions: 65 x 233 x 121 mm
Shipping port: Xiamen
Warranty: 12 months
Designed for direct installation inside compact control cabinets, the Beckhoff C6925-0020 industrial PC delivers robust processing capability in a passively cooled, space-saving format. This unit integrates a 3.5-inch motherboard with an Intel Celeron ULV processor to handle deterministic control tasks without the mechanical wear associated with cooling fans. Featuring a rugged aluminum housing, the Beckhoff C6925-0020 is built to withstand industrial environments while serving as an efficient control platform for TwinCAT-based applications.
| Manufacturer | Beckhoff Automation |
|---|---|
| Model / Article Number | C6925-0020 |
| Processor | Intel Celeron ULV 827E (1.4 GHz, 1 Core) |
| Motherboard Form Factor | 3.5-inch motherboard |
| TwinCAT Performance Class | TC2, TC3: 50 |
| Cooling Type | Passive (Fanless) |
| Primary Storage Slot | 1 x CFast slot |
| Expansion Slots | 2 x PCIe module slots (for Beckhoff PCIe modules) |
| Standard Interfaces | 4 x USB 2.0, 1 x DVI |
| Input Voltage | 24 V DC |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 55 degC |
| Dimensions (W x H x D) | 65 x 233 x 121 mm (without mounting plate) |
| Net Unit Weight | 1.7 kg (3.9 lbs) |
| Shipping Weight (Calculated) | 4.0 kg |
The C6925 series is a direct evolution of older Beckhoff cabinet IPC models. When replacing legacy C69xx units, ensure your current TwinCAT configuration maps correctly to the single-core Celeron architecture. For applications requiring multi-threaded tasks or heavier HMI load, verify CPU allocation limits prior to site commissioning.
Because this controller relies entirely on passive cooling, vertical installation is mandatory to encourage natural convective airflow. Mounting the IPC horizontally or reducing the clear envelope will restrict thermal dissipation, leading to automatic processor throttling or thermal safety shutdowns when ambient enclosure temperatures exceed 50 degC.
Always use a stabilized 24 V DC power supply. High ripple or transient voltage spikes on the primary DC bus can trigger hardware resets. If utilizing the optional UPS expansion, ensure the capacitive or battery storage system is fully calibrated within the operating software to allow safe state saves during unexpected power dropouts.
Mount the IPC vertically on the control cabinet wall using the pre-installed rear mounting plate. Ensure at least 5 cm (2 inches) of free air space above and below the device to permit unrestrained convective cooling.
Connect a functional earth ground directly to the low-resistance grounding bolt located on the chassis housing to minimize EMI and protect sensitive motherboard logic.
Insert the pre-configured CFast card containing the operating system and runtime binaries into the dedicated flash slot before applying primary system power.
Connect the 24 V DC power supply lines to the power terminal plug, checking correct polarity (+ / -) prior to switching on the supply.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
