Description

The BECKHOFF KS6811 is a specialized single-channel DALI/DSI master Bus Terminal designed to integrate digital lighting control interfaces directly into standard Beckhoff I/O networks. This terminal serves as an intelligent bridge, enabling bidirectional communication between a central automation controller and lighting components such as electronic ballasts, dimmers, and control gears. It features a pluggable wiring design that simplifies field installation, maintenance, and system upgrades by allowing the wiring block to be removed as a single unit without disconnecting individual conductors.

The KS6811 terminal features a built-in DALI power supply capable of delivering up to 130 mA, which simplifies installation by removing the need for an external bus power source in standard layouts. With a process image of 3 bytes of input and 3 bytes of output data, the terminal provides the communication throughput required for complex lighting commands, dimming curves, and status diagnostics. It operates as a master controller, supporting up to 64 DALI slaves and up to 16 groups, ensuring flexible network layouts in professional lighting automation.

Features

• Single-channel master interface supporting both DALI and DSI lighting control protocols.
• Direct integration of up to 64 DALI slaves and 16 configurable groups.
• Integrated DALI bus power supply delivering up to 130 mA with open-circuit protection.
• Pluggable connection level (KS series design) for efficient installation, wiring prep, and terminal replacement.
• Standardized bidirectional data transfer rate of 1200 baud for reliable DALI signaling.
• Comprehensive electrical isolation between the K-bus and DALI-bus to protect control-side electronics.
• Full configuration capability via the host Bus Coupler or automation controller.
• Direct software integration using the TwinCAT PLC DALI library.

Applications

• Commercial building automation, including automated office and retail lighting.
• Industrial lighting integration and centralized facility lighting management.
• Daylight harvesting systems, occupancy-based light control, and dimming networks.
• Integration of electronic control gears (ECG) and ballast units in assembly environments.

Technical Specifications

General

Electrical

Mechanical

Environmental and Compliance

Installation Guidelines

1. De-energize the System: Turn off all electrical power supplies to the DIN rail and the surrounding components before installing, removing, or wiring the module.
2. Mount the Terminal: Snap the KS6811 Bus Terminal onto a standard 35 mm DIN rail conforming to EN 60715, ensuring the double slot and key system aligns perfectly with the adjacent terminals. Lock the integrated rail release mechanism.
3. Prepare and Connect Wiring: Remove the pluggable wiring connector block if necessary for ease of access. Strip conductors to a length of 9 to 10 mm. Actuate the tension clamp with a small flat-head screwdriver, insert the conductor, and release to secure. Re-seat the connector block firmly onto the terminal housing.
4. Connect the DALI Bus: Connect the DALI bus wires to the designated terminal points. Check polarity and verify the network configuration does not exceed 64 slaves.
5. Verify Power and Grounding: Ensure the 24 V DC feed to the power contacts and K-bus supply are within the specified limits before applying power.
6. Commissioning: Power up the system and verify the statuses of the integrated diagnostic indicators, then use TwinCAT or your preferred bus controller tool to scan and configure the connected DALI devices.