Manufacturer: Bently Nevada
Product No.: 177230-02
Country of origin:United States
Product Type: Seismic Transmitters
Payment: T/T, Western Union
Weight: 131g
Shipping port: Xiamen
Warranty: 12 months
Designed for continuous machinery vibration monitoring, the Bently Nevada 177230-02 seismic transmitter provides a reliable 4 to 20 mA loop-powered output proportional to overall vibration velocity. This solid-state sensor is engineered to integrate directly with PLC, DCS, and SCADA control systems without requiring an external interface module. Operating by measuring case vibration, it provides an efficient and cost-effective method for tracking the health of balance-of-plant mechanical assets.
The hermetically sealed 316L stainless steel housing guarantees robust performance in demanding industrial settings. Please note that the manufacturer has designated the 177230-01-01-CN seismic transmitter as a replacement model for legacy 177230-02 configurations.
| Manufacturer | Bently Nevada |
|---|---|
| Part Number/Model | 177230-02 |
| Product Type | Seismic Transmitter |
| Measurement Range | 0 to 50.8 mm/s (0 to 2.0 in/s) velocity |
| Output Signal | 4 to 20 mA DC (loop-powered) |
| Operating Temperature Range | -40 degC to +85 degC (-40 degF to +185 degF) |
| Electrical Isolation | Greater than 10^8 ohms |
| Connector Type | 3-pin MIL-C-5015, 316L stainless steel |
| Case Material | 316L stainless steel |
| Height | 66.0 mm (2.60 in) |
| Diameter | 25.4 mm (1.00 in) |
| Weight | 0.131 kg (0.29 lb) |
To ensure accurate vibration measurements, mount the transmitter on a clean, flat surface that has been machined to a high finish. Utilize the specified mounting stud and apply the recommended torque to ensure rigid physical coupling with the machinery casing. Route the cabling away from high-voltage motor supply lines to minimize electromagnetic interference, and utilize appropriate shielding techniques with the 3-pin MIL-C-5015 connector.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Build and verify a first TwinCAT PLC project on a Beckhoff IPC. This checklist covers target selection, EtherCAT discovery, I/O mapping, safe activation, restart tests, and commissioning records.
A practical commissioning sequence for KEPServerEX OPC UA connections: define data ownership, test tags locally, configure endpoint and certificate trust, limit access, then verify failure recovery...
Commissioning an Ethernet-connected PLC often starts with the laptop, not the controller. Learn how to record existing settings, choose a temporary address, test connectivity, and restore the plant...
Combustible dust controls require more than alarms. Learn how to map dust generation, select instrumentation, design interlocks, handle failed feedback, test safe states, and maintain the full...
Hairpin windings raise slot fill and support compact traction motors, but conductor geometry, AC losses, insulation damage, weld quality, and cooling determine whether the design meets its targets.
Use Ansible to standardize SCADA server changes without expanding OT risk. This guide covers inventories, idempotent playbooks, staged testing, credentials, logging, and practical rollback controls.
