Bently Nevada 330101-00-10-10-02-05 3300 XL 8 mm Proximity Probe

Description

330101-00-10-10-02-05: 3300 XL 8 mm proximity probe featuring a 0.0 in unthreaded length (Option 00), 1.0 in case length (Option 10), and a 1.0 m total length (Option 10). This transducer configuration utilizes a miniature ClickLoc connector with standard cable (Option 02) and is certified with CSA, ATEX, and IECEx approvals (Option 05) for operation in hazardous areas.

This 3300 XL probe is a non-contact, eddy-current displacement transducer used in the 3300 XL 8 mm monitoring system chain. It provides precise shaft vibration and axial position measurement, ensuring compatibility with 3300 XL Proximitor sensors and extension cables. The configuration provides a rugged measurement solution for critical rotating machinery where standard thread and connector types are required.

Features

• Option 00: 0.0 in unthreaded length configuration
• Option 10: 1.0 in case length for standard mounting
• Option 10: 1.0 m system total length
• Option 02: Miniature ClickLoc connector with standard cable
• Option 05: CSA, ATEX, and IECEx hazardous area approvals
• Compatible with 3300 XL 8 mm Proximitor sensor and extension cable systems
• Designed for shaft vibration and axial position monitoring

Applications

• Steam and gas turbine shaft vibration monitoring
• Compressor and pump rotor position measurement
• Critical rotating machinery protection
• Hazardous area environments requiring CSA, ATEX, or IECEx certification

Ordering Information

Technical Specifications

Installation Guidelines

Ensure correct probe gapping during installation to maintain linear output. Tighten the probe case to a maximum recommended torque of 7.5 Nm (66 in-lbf) for standard forward-mounted probes. Route cables with a minimum bend radius of 25.4 mm (1.0 in) to prevent damage. When connecting the miniature ClickLoc connector, ensure finger-tight connection; do not use pliers or tools to overtighten.