Bently Nevada 330101-00-11-10-02-05 3300 XL 8 mm Proximity Probe

Description

The 330101-00-11-10-02-05 is a 3300 XL 8 mm proximity probe designed for non-contact eddy-current displacement measurement in critical rotating machinery. This specific configuration features a 3/8-24 UNF threaded steel probe body with 0.0 in unthreaded length (Option 00) and 1.1 in case length (Option 11). The probe includes a 1.0 m total system length (Option 10) and is equipped with a miniature coaxial ClickLoc connector on standard cable (Option 02). This unit is certified for use in hazardous areas with CSA, ATEX, and IECEx approvals (Option 05).

The 3300 XL 8 mm transducer system is engineered to provide precise shaft vibration and axial position measurement data for machine condition monitoring. The system comprises the probe, a matched extension cable, and a 3300 XL Proximitor sensor. This probe variant is non-armored and optimized for environments where mechanical abrasion protection is not required.

Features

• Option 00: 0.0 in unthreaded length for maximum threaded mounting depth.
• Option 11: 1.1 in overall case length for precise installation clearance.
• Option 10: 1.0 m total probe length.
• Option 02: Miniature coaxial ClickLoc connector with standard cable for reliable signal transmission.
• Option 05: CSA, ATEX, and IECEx certified for hazardous area operation.
• System Compatibility: Designed for use within 3300 XL 8 mm transducer chains.

Applications

• Steam, gas, and hydro turbine shaft vibration monitoring.
• Compressor and pump rotor position measurement.
• Axial position (thrust) and radial vibration monitoring.
• Critical rotating machinery protection in oil and gas, power generation, and petrochemical facilities.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed with the correct gap setting as specified in the 3300 XL system manual. When routing the coaxial cable, avoid sharp bends and maintain separation from high-voltage lines to prevent electromagnetic interference. The probe should be mounted in a compatible 3300 XL probe clamp bracket. For hazardous area installations, ensure compliance with the specific control drawings provided in the documentation to maintain intrinsic safety (Ex ia) or non-incendive (nA) ratings.