Bently Nevada 330101-00-20-10-01-00 3300 XL 8 mm Proximity Probe

Description

330101-00-20-10-01-00 is a 3300 XL 8 mm proximity probe assembly featuring a 3/8-24 UNF thread, 0.0 in unthreaded length (Option 00), 2.0 in case length (Option 20), and a 1.0 m total system length (Option 10). This specific configuration includes a miniature ClickLoc coaxial connector with a connector protector (Option 01) and does not require hazardous area agency approvals (Option 00).

The 3300 XL 8 mm transducer system provides accurate, non-contact measurement of shaft vibration and axial position on critical rotating machinery. It is designed to function within 3300 XL monitoring chains, pairing with the 330180 Proximitor sensor and 330130 extension cable to deliver consistent output signals. The probe tip is constructed of Polyphenylene sulfide (PPS), and the case is AISI 303 or 304 stainless steel.

Features

• 8 mm probe tip diameter for standard eddy-current gap measurements
• Miniature ClickLoc coaxial connector with protective cap (Option 01) for secure interface
• Unthreaded case design for precise mounting adjustment (Option 00)
• 1.0 m total system length (Option 10)
• Standard 3/8-24 UNF thread configuration
• Compatible with 3300 XL 8 mm Proximitor sensors and extension cables

Applications

• Turbine shaft vibration monitoring
• Compressor rotor position sensing
• Critical rotating machinery protection
• Fluid film bearing analysis
• Measurement in non-hazardous environments

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped according to the 3300 XL system manual using a standard 3300 XL test plug. Maintain the minimum cable bend radius of 25.4 mm during routing to prevent signal degradation. For threaded mounting, observe the recommended torque specifications of 7.5 Nm for the probe case. Always ensure the connector interface is kept clean and dry before mating the ClickLoc connections.