The Bently Nevada 330101-00-28-10-02-00 is an unarmored 8 mm proximity probe configured with a fully threaded 3/8-24 UNF housing (0.0 inches unthreaded length), a 2.8-inch case length, and a 1.0-meter (3.3 feet) standard coaxial cable with a miniature ClickLoc connector. Designed for systems that do not require hazardous area approvals, this specific variant provides non-contact vibration and shaft position measurements in industrial machinery. It acts as a critical sensing element within a 3300 XL monitoring chain, pairing seamlessly with a 330180 series Proximitor sensor and a corresponding standard extension cable to deliver highly accurate displacement readings.
This proximity probe utilizes eddy-current technology to track dynamic displacement, such as radial shaft vibration and axial thrust position. Since it is constructed without protective armor, this variant is ideal for installations where the cable path is adequately protected inside conduits or dry machine casings. Its 1.0-meter cable must be integrated into a 5-meter or 9-meter overall system configuration to maintain precise calibration and minimize interference.
Typical applications for this probe include turbine shaft vibration and position monitoring, critical compressor and pump rotor displacement measurements, and general rotating machinery protection within power generation, oil and gas, and chemical processing facilities.
| Option Segment | Code | Description |
|---|---|---|
| Orderable Part Number | 330101-00-28-10-02-00 | 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in (0 mm) unthreaded length |
| B - Overall Case Length Option | 28 | 2.8 in (71 mm) case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required |
| Manufacturer | Bently Nevada |
| Part Number/Model | 330101-00-28-10-02-00 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Probe Diameter | 8 mm |
| Operating Principle | Eddy current |
| Measurement Type | Displacement (proximity) |
| Linear Range | 2.0 mm (80 mils), starting at 0.25 mm (10 mils) from target |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) nominal |
| Probe DC Resistance | 7.59 ohms +/- 0.50 ohms (from center conductor to outer conductor) |
| Operating Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
| Weight | 0.14 kg |
To ensure proper operation of the proximity probe, verify that it is mounted with the correct probe gap (typically adjusted to -9 Vdc or approximately 1.27 mm / 50 mils) according to system calibration. Route the probe cable with proper shielding and grounding practices to eliminate noise coupling. Ensure that the thread engagement limits are respected during installation, and finger-tighten the ClickLoc connectors to prevent damage to the gold-plated contacts.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330101-00-28-10-02-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
The Bently Nevada 330101-00-28-10-02-00 is an unarmored 8 mm proximity probe configured with a fully threaded 3/8-24 UNF housing (0.0 inches unthreaded length), a 2.8-inch case length, and a 1.0-meter (3.3 feet) standard coaxial cable with a miniature ClickLoc connector. Designed for systems that do not require hazardous area approvals, this specific variant provides non-contact vibration and shaft position measurements in industrial machinery. It acts as a critical sensing element within a 3300 XL monitoring chain, pairing seamlessly with a 330180 series Proximitor sensor and a corresponding standard extension cable to deliver highly accurate displacement readings.
This proximity probe utilizes eddy-current technology to track dynamic displacement, such as radial shaft vibration and axial thrust position. Since it is constructed without protective armor, this variant is ideal for installations where the cable path is adequately protected inside conduits or dry machine casings. Its 1.0-meter cable must be integrated into a 5-meter or 9-meter overall system configuration to maintain precise calibration and minimize interference.
Typical applications for this probe include turbine shaft vibration and position monitoring, critical compressor and pump rotor displacement measurements, and general rotating machinery protection within power generation, oil and gas, and chemical processing facilities.
| Option Segment | Code | Description |
|---|---|---|
| Orderable Part Number | 330101-00-28-10-02-00 | 3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread, without armor |
| A - Unthreaded Length Option | 00 | 0.0 in (0 mm) unthreaded length |
| B - Overall Case Length Option | 28 | 2.8 in (71 mm) case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required |
| Manufacturer | Bently Nevada |
| Part Number/Model | 330101-00-28-10-02-00 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Probe Diameter | 8 mm |
| Operating Principle | Eddy current |
| Measurement Type | Displacement (proximity) |
| Linear Range | 2.0 mm (80 mils), starting at 0.25 mm (10 mils) from target |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) nominal |
| Probe DC Resistance | 7.59 ohms +/- 0.50 ohms (from center conductor to outer conductor) |
| Operating Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
| Weight | 0.14 kg |
To ensure proper operation of the proximity probe, verify that it is mounted with the correct probe gap (typically adjusted to -9 Vdc or approximately 1.27 mm / 50 mils) according to system calibration. Route the probe cable with proper shielding and grounding practices to eliminate noise coupling. Ensure that the thread engagement limits are respected during installation, and finger-tighten the ClickLoc connectors to prevent damage to the gold-plated contacts.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
