Fully threaded 3/8-24 UNF probe body (Option 00) with a 4.3 in case length (Option 43) and a 1.5 m total length (Option 15) specifies this 3300 XL 8 mm probe configuration — 330101-00-43-15-02-00. This unarmored, non-contacting probe pairs with a 3300 XL Proximitor sensor and an extension cable to measure physical displacement. The probe operates using the eddy-current principle to track static and dynamic distance variations between the probe tip and a conductive target material, typically an AISI 4140 steel shaft.
This configuration employs a standard cable with a ClickLoc connector without a connector protector (Option 02) and is supplied without agency approvals (Option 00). The PPS plastic probe tip and the stainless steel case provide durability in environments containing lubricating oil or steam. This variant serves applications where external conduit or cable armor is not required.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330101-00-43-15-02-00 | 3300 XL 8 mm proximity probe, 3/8-24 UNF thread, unarmored |
| A - Unthreaded Length Option | 00 | 0.0 in (fully threaded) |
| B - Overall Case Length Option | 43 | 4.3 in overall case length |
| C - Total Length Option | 15 | 1.5 meters (4.9 feet) |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330101-00-43-15-02-00 |
| System Compatibility | 3300 XL 8 mm Proximity Transducer System |
| Probe Diameter | 8 mm |
| Measurement Type | Displacement (proximity) |
| Operating Principle | Eddy current |
| Nominal Linear Range | 2 mm (80 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) typical |
| Nominal Probe DC Resistance (R_PROBE) | 7.73 +/- 0.50 ohms (for 1.5 m length) |
| Connector Type | Gold click-type miniature coaxial ClickLoc connector |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Pressure Seal Rating | Viton O-ring differential pressure seal |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Weight | 0.14 kg |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
Install the probe by setting the appropriate probe gap according to the system calibration, which is typically set at -9 Vdc (approximately 1.27 mm or 50 mils) for radial vibration measurements. Route the coaxial cable with proper shielding and grounding practices standard for vibration monitoring systems to prevent electrical noise interference. Ensure the thread engagement does not exceed 0.563 in (14.3 mm) for the 3/8-24 UNF threads to avoid binding during installation.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330101-00-43-15-02-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Fully threaded 3/8-24 UNF probe body (Option 00) with a 4.3 in case length (Option 43) and a 1.5 m total length (Option 15) specifies this 3300 XL 8 mm probe configuration — 330101-00-43-15-02-00. This unarmored, non-contacting probe pairs with a 3300 XL Proximitor sensor and an extension cable to measure physical displacement. The probe operates using the eddy-current principle to track static and dynamic distance variations between the probe tip and a conductive target material, typically an AISI 4140 steel shaft.
This configuration employs a standard cable with a ClickLoc connector without a connector protector (Option 02) and is supplied without agency approvals (Option 00). The PPS plastic probe tip and the stainless steel case provide durability in environments containing lubricating oil or steam. This variant serves applications where external conduit or cable armor is not required.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330101-00-43-15-02-00 | 3300 XL 8 mm proximity probe, 3/8-24 UNF thread, unarmored |
| A - Unthreaded Length Option | 00 | 0.0 in (fully threaded) |
| B - Overall Case Length Option | 43 | 4.3 in overall case length |
| C - Total Length Option | 15 | 1.5 meters (4.9 feet) |
| D - Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | Not required |
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number / Model | 330101-00-43-15-02-00 |
| System Compatibility | 3300 XL 8 mm Proximity Transducer System |
| Probe Diameter | 8 mm |
| Measurement Type | Displacement (proximity) |
| Operating Principle | Eddy current |
| Nominal Linear Range | 2 mm (80 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) typical |
| Nominal Probe DC Resistance (R_PROBE) | 7.73 +/- 0.50 ohms (for 1.5 m length) |
| Connector Type | Gold click-type miniature coaxial ClickLoc connector |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Pressure Seal Rating | Viton O-ring differential pressure seal |
| Operating and Storage Temperature | -52 degC to +177 degC (-62 degF to +350 degF) |
| Weight | 0.14 kg |
| Dimensions | 45 mm x 95 mm x 95 mm (H x W x D) |
Install the probe by setting the appropriate probe gap according to the system calibration, which is typically set at -9 Vdc (approximately 1.27 mm or 50 mils) for radial vibration measurements. Route the coaxial cable with proper shielding and grounding practices standard for vibration monitoring systems to prevent electrical noise interference. Ensure the thread engagement does not exceed 0.563 in (14.3 mm) for the 3/8-24 UNF threads to avoid binding during installation.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
