Bently Nevada 330102-00-20-10-02-05 3300 XL 8 mm Proximity Probe

Description

The 330102-00-20-10-02-05 is a 3300 XL 8 mm proximity probe configuration featuring an armored cable for mechanical protection, 3/8-24 UNF threads, a 0.0 in unthreaded length (Option 00), 2.0 in case length (Option 20), 1.0 m total length (Option 10), and standard miniature coaxial ClickLoc connector (Option 02). This transducer is part of the Bently Nevada 3300 XL 8 mm Proximity Transducer System, used to measure shaft vibration and axial position on critical rotating machinery.

The 330102 series includes an integral stainless steel armor to provide increased protection for the probe lead in harsh environments. This unit pairs with the 3300 XL Proximitor sensor and 3300 XL extension cable to form a complete measurement chain. The 1.0 m total system length is optimized for applications where the Proximitor sensor is mounted in proximity to the probe termination point.

Features

• 3/8-24 UNF threaded stainless steel probe body with integral armor for abrasion resistance
• Option 00: 0.0 in unthreaded length
• Option 20: 2.0 in total case length
• Option 10: 1.0 m total system length
• Option 02: Miniature coaxial ClickLoc connector, standard cable
• Option 05: CSA, ATEX, and IECEx hazardous area approvals
• Compatible with standard 3300 XL 8 mm monitoring components and Proximitor sensors

Applications

• Shaft vibration monitoring on large rotating machinery
• Axial position (thrust) measurement
• Bearing wear and clearance monitoring
• Oil and gas, power generation, and petrochemical process equipment
• Critical machinery protection where armored cabling is required for lead protection

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed with the specified gap as per the 3300 XL system documentation, typically 1.27 mm (50 mils). The armored cable must be routed to avoid excessive strain on the connector interface. Ensure all electrical connections are clean and secure before applying power. If installing in hazardous areas, verify the installation conforms to the specific requirements of the hazardous area certifications (Option 05).

Compliance and Certifications

This product is certified for use in hazardous areas with CSA, ATEX, and IECEx approvals as specified by Option 05. Consult the latest Approvals Quick Reference Guide (108M1756) for specific zone and class ratings.