Bently Nevada 330103-00-05-20-02-05 3300 XL 8 mm Proximity Probe

Description

The 330103-00-05-20-02-05 is a 3300 XL 8 mm proximity probe, specifically engineered for non-contact eddy-current displacement measurement. This configuration features an M10 x 1 thread (without armor), a 0 mm unthreaded length (Option 00), and a 50 mm case length (Option 05). It is supplied with a 2.0-meter system length (Option 20), a standard miniature coaxial ClickLoc connector (Option 02), and agency approvals for CSA, ATEX, and IECEx (Option 05).

Designed for integration into 3300 XL 8 mm monitoring chains, this probe provides precise shaft vibration and axial position data for critical rotating machinery such as turbines and compressors. The 3300 XL system is fully compatible with standard 3300 XL Proximitor sensors and extension cables, ensuring linear, reliable signal transmission across the specified measurement range. This unit is built to withstand industrial environments, delivering accurate, real-time feedback for machinery protection systems.

Features

• Configuration: 3300 XL 8 mm proximity probe with M10 x 1 thread, unarmored.
• Unthreaded Length: 0 mm (Option 00).
• Case Length: 50 mm (Option 05).
• Total System Length: 2.0 meters (Option 20).
• Connector Type: Miniature coaxial ClickLoc connector, standard cable (Option 02).
• Agency Approvals: CSA, ATEX, IECEx certified (Option 05).

Applications

• Shaft vibration and axial position monitoring in rotating machinery.
• Fluid-film bearing performance analysis.
• Critical machinery protection in power generation, oil and gas, and petrochemical facilities.
• Integration into existing 3300 XL monitoring systems.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed with the specified gap to the target surface according to the 3300 XL system manual. Secure the M10 x 1 threaded body firmly into the mounting bracket. Use appropriate cable routing to avoid physical damage or electrical interference, and protect all connectors using standard environmental shielding or connector protectors if the environment is prone to moisture or contaminants. System length matching (probe + extension cable) must equal the Proximitor sensor calibration length.

Compliance and Certifications

• CSA (Canadian Standards Association)
• ATEX (Atmospheres Explosibles)
• IECEx (International Electrotechnical Commission Explosive)