Bently Nevada 330102-00-20-10-11-05 3300 XL 8 mm Proximity Probe

Description

The 330102-00-20-10-11-05 is a 3300 XL 8 mm proximity probe configured with 3/8-24 UNF threads and integrated protective armor. This unit features a 0.0 in unthreaded length (Option 00) and a 2.0 in case length (Option 20), providing a robust measurement interface for 3300 XL monitoring systems. This specific configuration utilizes a 1.0 m total system length (Option 10) and is equipped with a FluidLoc cable and a connector protector (Option 11) to maintain signal integrity in environments where oil or fluid sealing is critical. Designed for high-reliability vibration and position monitoring, this probe is part of the 3300 XL 8 mm transducer family. The FluidLoc cable construction prevents fluid migration through the cable jacket, while the included connector protector guards the ClickLoc interface against contamination. This model is certified with CSA, ATEX, and IECEx approvals (Option 05) for use in hazardous areas, ensuring compliance with global safety standards for critical rotating machinery.

Features

• 3300 XL 8 mm proximity probe with 3/8-24 UNF thread and protective armor
• 0.0 in unthreaded length and 2.0 in case length for standard installation
• 1.0 m total system length compatible with standard 3300 XL Proximitor sensors
• FluidLoc cable construction prevents oil and fluid leakage through the cable path
• Miniature coaxial ClickLoc connector with connector protector included
• Certified for hazardous area use (CSA, ATEX, IECEx)

Applications

• Turbine and compressor shaft vibration monitoring
• Axial position and rotor displacement measurement
• Critical rotating machinery in petrochemical and oil and gas facilities
• Power generation equipment requiring hazardous area certification
• Bearing wear and internal clearance monitoring

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330102-00-20-10-11-05	3300 XL 8 mm Proximity Probe, Armored
A - Unthreaded Length	00	0.0 in
B - Case Length	20	2.0 in
C - Total Length	10	1.0 meter (3.3 feet)
D - Connector/Cable	11	ClickLoc connector with connector protector, FluidLoc cable
E - Agency Approval	05	CSA, ATEX, IECEx Approvals

Technical Specifications

Manufacturer	Bently Nevada (Baker Hughes)
Part Number	330102-00-20-10-11-05
Probe Diameter	8.0 mm
Thread Size	3/8-24 UNF
Cable Type	FluidLoc, Armored
Total Length	1.0 m
Connector Type	Miniature coaxial ClickLoc
Agency Approvals	CSA, ATEX, IECEx

Installation Guidelines

• Ensure the probe gap is set according to the 3300 XL system manual for the specific machinery application.
• Use the appropriate mounting bracket to secure the probe, ensuring it remains isolated from the mounting surface if required by electrical installation standards.
• Route the armored cable in protected conduit where possible to prevent physical damage.
• Verify that the total system length (probe + extension cable) matches the requirements of the Proximitor sensor (e.g., 1.0 m system).
• Tighten all connections by hand until the ClickLoc connector is secure; avoid overtightening or using tools on the connector assembly.

Compliance and Certifications

• CSA (Canadian Standards Association)
• ATEX (Atmospheres Explosibles)
• IECEx (International Electrotechnical Commission Explosive)