Bently Nevada 330102-00-27-10-02-05 3300 XL 8 mm Proximity Probe

Description

330102-00-27-10-02-05: 3300 XL 8 mm proximity probe with integrated protective armor, featuring a 0.0 in unthreaded length (Option 00), 2.7 in case length (Option 27), and 1.0 m total system length (Option 10). This probe configuration includes the standard miniature coaxial ClickLoc connector (Option 02) and carries CSA, ATEX, and IECEx hazardous area approvals (Option 05). The 3300 XL 8 mm transducer system is utilized for non-contact eddy-current displacement measurement in critical machinery, providing essential data for vibration and position monitoring of shafts and rotors. This specific variant utilizes an armored cable construction to provide mechanical protection in harsh industrial environments. It is designed to be paired with 3300 XL Proximitor sensors and extension cables as part of a calibrated, integrated monitoring chain.

Features

• Option 00: 0.0 in unthreaded length
• Option 27: 2.7 in overall case length
• Option 10: 1.0 m total system length
• Option 02: Miniature coaxial ClickLoc connector (standard cable)
• Option 05: CSA, ATEX, IECEx hazardous area approvals
• Integrated stainless steel protective armor for mechanical protection
• 3/8-24 UNF-2A thread configuration
• 8 mm probe tip diameter

Applications

• Steam, gas, and hydro turbine shaft vibration and axial position monitoring
• Compressor and centrifugal pump rotor position
• Critical rotating machinery protection
• Harsh industrial environments requiring mechanical cable protection

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330102-00-27-10-02-05	3300 XL 8 mm proximity probe, 3/8-24 UNF, with armor
A - Unthreaded Length	00	0.0 in
B - Case Length	27	2.7 in
C - Total Length	10	1.0 meter (3.3 feet)
D - Connector	02	Miniature coaxial ClickLoc connector
E - Agency Approval	05	CSA, ATEX, IECEx Approvals

Technical Specifications

Manufacturer	Bently Nevada (Baker Hughes)
Part Number	330102-00-27-10-02-05
Probe Diameter	8.0 mm (0.31 in)
Thread Size	3/8-24 UNF-2A
Cable Type	Coaxial with armor
Total Length	1.0 m
Connector Type	Miniature coaxial ClickLoc
Approvals	CSA, ATEX, IECEx
Operating Temperature	-55 degC to +177 degC (T2 classification)

Installation Guidelines

• Ensure the probe is gapped according to the 3300 XL 8 mm system manual (typically using a feeler gauge) to maintain the linear range.
• The armored cable should be routed through conduit or secured to prevent vibration-induced fatigue or abrasion.
• Connect the probe to the extension cable and Proximitor sensor, ensuring all connectors are finger-tight and free of contaminants.
• Install the Proximitor sensor in a protected, non-hazardous area or approved housing (e.g., DIN-rail or panel mount) unless local regulations specify otherwise.

Compliance and Certifications

• CSA, ATEX, IECEx hazardous area certifications for explosive atmospheres (Option 05)
• Compliant with Bently Nevada installation drawings for intrinsically safe (ia) and non-incendive (nA, ec) protection methods