Bently Nevada 330103-00-02-05-02-00 3300 XL 8 mm Proximity Probe

Description

The 330103-00-02-05-02-00 is a 3300 XL 8 mm proximity probe configured for reverse-mount installations. This transducer is designed for non-contact eddy-current displacement measurement, used primarily in 3300 XL monitoring chains for tracking shaft vibration and axial position on critical rotating machinery. This specific configuration features an M10 x 1 threaded probe body, a total length of 0.5 meters, and utilizes a standard miniature ClickLoc coaxial connector.

Option 00 specifies an unthreaded length of 0.0 mm, while Option 02 provides a case length of 20 mm. The assembly is supplied without armor (Option 02 connector type) and is intended for use in environments where specific hazardous area approvals are not required (Option 00). This probe pairs with the 3300 XL Proximitor sensor and extension cable to form a complete calibrated measurement system.

Features

• M10 x 1 thread probe body design for reverse-mount installations
• 0.5 meter total system length
• Miniature ClickLoc coaxial connector for secure, reliable signal termination
• Eddy-current principle for precise displacement measurement
• Compatible with 3300 XL 8 mm Proximitor sensors and extension cables

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• General rotating machinery protection on 8 mm probe systems
• Industrial environments requiring non-contact displacement sensing

Ordering Information

Technical Specifications

Installation Guidelines

Ensure that the probe is mounted using appropriate M10 x 1 hardware. The unthreaded length must be at least 20 mm less than the total case length for proper installation. Use Bently Nevada recommended mounting brackets to maintain required clearance and electrical isolation. Ensure the extension cable length and probe length are summed correctly to match the calibrated Proximitor sensor total length (e.g., 0.5 m, 5.0 m, or 9.0 m systems).