Bently Nevada 330103-00-05-10-01-00 3300 XL 8 mm Proximity Probe

Description

The 330103-00-05-10-01-00 is an 8 mm proximity probe from the Bently Nevada 3300 XL series, configured with an M10 x 1 thread (Option 00 unthreaded length, Option 05 case length), a 1.0 m total cable length, and the standard connector protector assembly (Option 01). This probe is designed for non-contact, eddy-current displacement measurement within 3300 XL monitoring chains, providing critical vibration and axial position data for rotating machinery. This configuration features an unarmored probe body with M10 x 1 threading, optimized for use in installations where standard, non-armored cabling is sufficient. As a core component of the 3300 XL system, it pairs with the 3300 XL Proximitor sensor and extension cable to ensure precise signal transmission. The inclusion of the connector protector (Option 01) enhances reliability by shielding the connection interface from environmental contaminants in industrial settings.

Features

• M10 x 1 thread configuration for compatibility with metric mounting interfaces
• 1.0 m total system length
• Standard coaxial cable without armor
• Miniature ClickLoc coaxial connector equipped with a connector protector
• Component of the 3300 XL 8 mm transducer system for accurate shaft vibration and position monitoring
• -55 degC to +177 degC operating temperature range (depending on hazardous area classification)

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection
• General-purpose industrial eddy-current displacement sensing

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330103-00-05-10-01-00	3300 XL 8 mm Proximity Probe, M10 x 1 thread
A - Unthreaded Length	00	0.0 in (per datasheet)
B - Overall Case Length	05	0.5 in (per datasheet)
C - Total Length	10	1.0 meter (3.3 feet)
D - Connector and Cable	01	Miniature ClickLoc connector with connector protector, standard cable
E - Agency Approval	00	Not required

Technical Specifications

Manufacturer	Bently Nevada
Model	330103 3300 XL 8 mm Proximity Probe
Thread Size	M10 x 1
Probe Diameter	8 mm
Cable Type	Standard coaxial (unarmored)
Total Length	1.0 m
Connector	Miniature ClickLoc with connector protector
Operating Temperature	-55 degC to +177 degC (dependent on application)

Installation Guidelines

• Ensure the probe tip is correctly gapped according to system manual specifications to maintain linear range.
• Protect the coaxial connector interface during installation to prevent signal degradation.
• Route cables away from high-voltage lines or sources of electromagnetic interference to prevent signal noise.
• Verify thread compatibility with the mounting bracket before installation.

Compliance and Certifications

• This configuration (Option 00) does not require specific hazardous area agency approvals.
• System design complies with Bently Nevada 3300 XL datasheet standards (141194).