Bently Nevada 330103-00-05-10-02-05 3300 XL 8 mm Proximity Probe

Description

The 330103-00-05-10-02-05 is a 3300 XL 8 mm proximity probe configured with an M10 x 1 thread (Option 00 unthreaded length, Option 05 case length), 1.0 m total system length (Option 10), and standard connector with no connector protector (Option 02). This transducer is part of the Bently Nevada 3300 XL 8 mm proximity transducer system, which provides non-contact displacement measurement for critical rotating machinery. The Option 05 designation indicates this unit carries CSA, ATEX, and IECEx hazardous area approvals. Designed for high-precision vibration and axial position monitoring, this probe pairs with the 3300 XL Proximitor sensor and extension cable to form a complete monitoring chain. The 8 mm probe tip is engineered to withstand demanding industrial environments, and the M10 x 1 threaded housing allows for secure mounting in metric-threaded machine cases or brackets.

Features

• M10 x 1 probe thread (330103 series)
• Option 00: 0.0 in unthreaded length
• Option 05: 0.5 in case length
• Option 10: 1.0 m total system length
• Option 02: Miniature coaxial ClickLoc connector, standard cable
• Option 05: CSA, ATEX, IECEx hazardous area approvals
• Non-contact eddy-current measurement technology

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection
• Fluid film bearing monitoring
• Petrochemical and power generation industrial environments

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330103-00-05-10-02-05	3300 XL 8 mm Proximity Probe, M10 x 1 thread
A - Unthreaded Length	00	0.0 in
B - Case Length	05	0.5 in (approx. 12.7 mm)
C - Total Length	10	1.0 m
D - Connector/Cable	02	Miniature coaxial ClickLoc connector, standard cable
E - Agency Approval	05	CSA, ATEX, IECEx Approvals

Technical Specifications

Manufacturer	Bently Nevada (Baker Hughes)
Part Number	330103-00-05-10-02-05
Probe Diameter	8 mm
Thread Size	M10 x 1
System Length	1.0 m
Connector Type	Miniature coaxial ClickLoc
Cable Type	Standard
Agency Approvals	CSA, ATEX, IECEx

Installation Guidelines

• Ensure the Proximitor sensor is installed in an area providing at least IP54 protection.
• Install per Bently Nevada drawing 141092 for ia (intrinsic safety) installations.
• Install per Bently Nevada drawing 140979 for nA/ec (non-sparking/increased safety) installations.
• Ensure the probe gap is set according to the machinery monitoring requirements.
• Verify that the total length of the probe and extension cable matches the calibrated length of the Proximitor sensor (standard total length is 5 m or 9 m depending on the Proximitor).

Compliance and Certifications

• CSA, ATEX, IECEx (Option 05)
• Ex ia IIC T5...T1 Ga
• Ex nA IIC T5...T1 Gc