Bently Nevada 330103-00-05-20-02-00 3300 XL 8 mm Proximity Probe

Description

330103-00-05-20-02-00: 3300 XL 8 mm proximity probe, M10 x 1 thread, 0.0 in unthreaded length (Option 00), 0.5 in case length (Option 05), 2.0 m total length (Option 20), miniature coaxial ClickLoc connector (Option 02), and no agency approval (Option 00).

This 3300 XL 8 mm proximity probe is designed for continuous non-contact vibration and position measurement on rotating machinery. As a key component of the 3300 XL 8 mm transducer system, this probe provides precise gap, displacement, and vibration data to the Proximitor sensor, which conditions the signal for monitoring systems. This specific configuration features an M10 x 1 threaded body without armor, making it ideal for installations requiring standardized mounting in metric-threaded boreholes where abrasive protection is not required.

Features

• M10 x 1 thread probe body (330103 base model)
• 0.0 in unthreaded length (Option 00)
• 0.5 in overall case length (Option 05)
• 2.0 m total system length (Option 20)
• Miniature coaxial ClickLoc connector (Option 02)
• Non-armored cable construction
• Standard temperature operating range

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical machinery protection systems
• Metric-threaded probe installation points

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped according to the 3300 XL system manual to maintain the linear measurement range. Use the M10 x 1 threaded mounting bracket (sold separately) to secure the probe. Avoid over-tightening to prevent thread damage. Ensure cable routing is clear of moving machinery and verify that the miniature coaxial connector is firmly locked to the extension cable to prevent signal loss.