Bently Nevada 330103-00-06-05-02-05 3300 XL 8 mm Proximity Probe

Description

The 330103-00-06-05-02-05 is a 3300 XL 8 mm proximity probe featuring an M10 x 1 thread, a 0.0 mm unthreaded length (Option 00), and a 60 mm case length (Option 06). This unarmored, eddy-current transducer is engineered for precise non-contact displacement measurement in industrial rotating machinery, providing reliable monitoring of shaft vibration and axial position.

Designed for compatibility with 3300 XL monitoring systems, this unit pairs with 3300 XL Proximitor sensors and extension cables. The configuration includes a 0.5 meter total system length (Option 05) and a standard miniature coaxial ClickLoc connector (Option 02) without a connector protector. With Option 05 agency approval (CSA, ATEX, IECEx), this probe is suitable for hazardous area installations where verified safety standards are required.

Features

• M10 x 1 thread configuration (Option 00 unthreaded length, 60 mm case length)
• 0.5 meter total length system compatibility
• Miniature ClickLoc coaxial connector for secure, reliable signal transmission
• Unarmored probe design for standard industrial monitoring environments
• Option 05 CSA, ATEX, IECEx agency approvals for hazardous location safety
• Consistent linear output for accurate machinery protection and condition monitoring

Applications

• Turbine and compressor shaft vibration monitoring
• Axial position measurement on critical rotating machinery
• Hydroelectric and steam turbine monitoring chains
• Process and power generation plant machinery protection

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is mounted using the recommended Bently Nevada threaded mounting brackets. Tighten the probe case to 22.6 N-m (200 in-lbf) in standard applications. Connectors should be kept clean and finger-tightened during assembly. Ensure the total system length matches the calibration of the Proximitor sensor (0.5 meter in this configuration). For hazardous areas, install according to the specific drawing referenced in the compliance documentation.

Compliance and Certifications

This product configuration (Option 05) is certified for use in hazardous environments under CSA, ATEX, and IECEx standards. Consult the Approvals Quick Reference Guide (108M1756) for complete, up-to-date regional certification data.