Bently Nevada 330103-00-07-05-02-00 3300 XL 8 mm Proximity Probe

Description

The 330103-00-07-05-02-00 is an 8 mm proximity probe from the Bently Nevada 3300 XL transducer system, configured with an M10 x 1 thread (Option 04 base type), 0.0 in unthreaded length (Option 00), 0.7 in case length (Option 07), and a 0.5 meter total length (Option 05). This non-contact eddy-current displacement probe is designed for use in critical machinery monitoring applications, specifically for measuring shaft vibration and axial position on rotating equipment.

This configuration features a miniature coaxial ClickLoc connector with standard cable (Option 02) and no required agency approvals (Option 00). As part of the 3300 XL series, it provides advanced measurement accuracy and environmental robustness when paired with a compatible 3300 XL Proximitor sensor and extension cable. The M10 x 1 threaded body allows for precise mounting in machinery cases, while the 0.5 meter lead length is optimized for installations where the Proximitor sensor is located in close proximity to the measurement point.

Features

• M10 x 1 thread standard for metric mounting installations
• 0.0 in unthreaded length and 0.7 in case length configuration
• 0.5 meter total length suited for compact installation layouts
• Miniature coaxial ClickLoc connector for secure, reliable signal termination
• Compatible with 3300 XL series Proximitor sensors and extension cables
• Non-contact measurement of radial vibration and axial position
• Standard cable type without armor

Applications

• Hydroelectric turbine-generator sets
• Steam and gas turbine vibration monitoring
• Centrifugal compressor shaft position and vibration
• Critical rotating machinery protection and condition monitoring
• Rotating equipment requiring 8 mm eddy-current probe sensing

Ordering Information

Technical Specifications

Installation Guidelines

Ensure that the probe is mounted using the appropriate threaded bracket. When installing, verify the probe gap according to the system manual (141078) to maintain the linear range of the transducer. The ClickLoc connector should be tightened until the internal mechanism clicks, ensuring proper mechanical connection without over-torquing. Proper cable routing and shielding are essential to minimize electromagnetic interference. Avoid excessive bending of the coaxial cable to prevent impedance changes.