Bently Nevada 330103-00-19-10-12-00 3300 XL 8 mm Proximity Probe

Description

The 330103-00-19-10-12-00 is an 8 mm proximity probe configuration within the 3300 XL Proximity Transducer System. This unit features an M10 x 1 threaded probe body with a 0.0 in unthreaded length (Option 00) and a 1.9 in case length (Option 19). Designed for precision non-contact displacement measurement, this transducer assembly provides a 1.0 m total system length (Option 10) and utilizes a miniature coaxial ClickLoc connector paired with a FluidLoc cable (Option 12) to resist oil migration through the cable jacket.

As a key component of the 3300 XL 8 mm transducer system, this probe is engineered for reliable service in demanding industrial environments, including oil and gas, power generation, and petrochemical facilities. The FluidLoc cable configuration (Option 12) is specifically selected for applications where preventing oil leakage or migration along the cable path is required. This system operates as part of a calibrated set, including the compatible 3300 XL Proximitor sensor and extension cable, ensuring measurement accuracy for shaft vibration and axial position monitoring.

Features

• 8 mm probe diameter for standard proximity sensing applications
• M10 x 1 thread configuration (330103 series)
• 1.0 m total system length (Option 10)
• FluidLoc cable (Option 12) to prevent fluid migration
• Miniature coaxial ClickLoc connector for secure, reliable signal termination
• 0.0 in unthreaded length (Option 00)
• 1.9 in case length (Option 19)
• Compatible with 3300 XL Proximitor sensors and extension cables

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position and displacement measurement
• Critical rotating machinery protection
• Fluid-tight cable routing environments
• General-purpose proximity measurement chains

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed with the correct gap as specified in the 3300 XL system manual. When using the FluidLoc cable (Option 12), verify that the cable is properly routed and secured to maintain the integrity of the oil-resistant seal. Do not exceed the minimum bend radius of the coaxial cable. For standard installations, use the appropriate probe mounting bracket (ordered separately) to fix the M10 x 1 thread position. Ensure all connectors are clean and free of contaminants before mating to maintain signal linearity.

Compliance and Certifications

This configuration (Option 00) is designated for use in non-hazardous area applications. For hazardous area installations, contact a representative for certified variants (Option 05).