Bently Nevada 330103-02-07-05-02-05 3300 XL 8 mm Proximity Probe

Description

The 330103-02-07-05-02-05 is a 3300 XL 8 mm proximity probe configuration featuring an M10 x 1 thread, an unthreaded length of 0.2 inches (Option 02), a total case length of 0.7 inches (Option 07), and a 0.5 meter total system length (Option 05). This probe is designed for use in non-contact eddy-current displacement measurement applications, specifically for monitoring shaft vibration and axial position in critical rotating machinery. It utilizes a miniature coaxial ClickLoc connector and standard cable (Option 02) and includes CSA, ATEX, and IECEx agency approvals (Option 05).

This transducer is a component of the 3300 XL 8 mm Proximity Transducer System, which typically pairs with a 3300 XL Proximitor sensor and an extension cable to form a complete measurement chain. The system is engineered to provide precise gap measurement between the probe tip and the observed target, such as a turbine or compressor shaft. The 330103 model is constructed with an M10 x 1 threaded body, providing a specific mechanical interface for applications where this metric thread is required.

Features

• M10 x 1 thread configuration for compatibility with metric mounting interfaces.
• Option 02: Miniature coaxial ClickLoc connector, standard cable.
• Option 05: Agency approval package including CSA, ATEX, and IECEx certifications.
• 0.5 meter total system length designed for integration into compact or localized monitoring arrangements.
• 8 mm probe tip diameter for standard eddy-current displacement sensing.
• Compatible with 3300 XL Proximitor sensors and extension cables.

Applications

• Turbine and compressor shaft vibration monitoring.
• Rotor axial position measurement.
• Critical rotating machinery protection in oil and gas, power generation, and petrochemical industries.
• Machinery requiring precise, non-contact proximity sensing in hazardous environments.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the 3300 XL 8 mm Proximity Transducer System manual to maintain linear output. When installing, verify that the cable is routed away from sources of excessive heat or abrasion. The ClickLoc connector should be tightened to the specified torque to maintain signal integrity. In hazardous area applications, ensure all installation practices comply with the local codes indicated by the ATEX/IECEx/CSA certifications.

Compliance and Certifications

• CSA (Canadian Standards Association)
• ATEX (Atmospheres Explosibles)
• IECEx (International Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres)