Bently Nevada 330104-00-10-50-02-00 3300 XL 8 mm Proximity Probe

Description

330104-00-10-50-02-00: 3300 XL 8 mm proximity probe, 1/4-28 UNF thread, 1.0 in case length (Option 10), 5.0 m total length (Option 50), and Miniature ClickLoc coaxial connector (Option 02). This transducer is a non-contact, eddy-current displacement sensor used within 3300 XL 8 mm monitoring chains for precise machine condition assessment.

The 330104 series probe configuration provides essential shaft vibration and axial position measurement data for critical rotating machinery. When combined with the 3300 XL Proximitor sensor and 3300 XL extension cable, the system provides accurate signal transmission for vibration protection and condition monitoring. This specific configuration, with a 5.0 m total length and unarmored cable, is suitable for installations where additional mechanical abrasion protection is not required.

Features

• 1/4-28 UNF thread specification (330104 series).
• 1.0 in case length (Option 10).
• 5.0 m total system length (Option 50).
• Miniature ClickLoc coaxial connector (Option 02).
• Standard temperature range capability for monitoring of rotating shafts.
• Compatible with 3300 XL 8 mm Proximitor sensor and 3300 XL extension cable components.

Applications

• Steam and gas turbine machinery protection.
• Compressor and pump shaft vibration monitoring.
• Rotor axial position measurement.
• Reciprocating machinery condition monitoring.
• Rotating machinery requiring 8 mm eddy-current probe interfaces.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is mounted using the recommended torque settings to prevent casing distortion, which can affect sensor linearity. The coaxial cable should be routed away from high-voltage AC lines or sources of electrical interference to maintain signal integrity. The 3300 XL probe system requires calibration specific to the target material to ensure accurate output voltage per unit displacement.