Bently Nevada 330103-08-15-10-02-00 3300 XL 8 mm Proximity Probe

Description

330103-08-15-10-02-00 is an 8 mm proximity probe configuration within the 3300 XL transducer system, featuring a 1/4-28 UNF thread, 0.8 in unthreaded length (Option 08), 1.5 in case length (Option 15), and a 1.0 m total length (Option 10). This probe is equipped with a miniature ClickLoc connector and standard cable (Option 02) and is supplied without hazardous area agency approvals (Option 00).

The 330103 series probe provides non-contact eddy-current displacement measurement for critical machinery monitoring, serving as a primary component in 3300 XL 8 mm monitoring chains. It is designed for use with the 330180 Proximitor sensor and 330130 extension cable to monitor shaft vibration and axial position on turbines, compressors, and other rotating equipment. The system maintains high accuracy and linearity by compensating for cable length and probe impedance variations.

Features

• 1/4-28 UNF thread with 0.8 in unthreaded length (Option 08)
• 1.5 in case length (Option 15) for standard installation environments
• 1.0 m system length (Option 10) suitable for local mounting configurations
• Miniature ClickLoc connector (Option 02) for secure, tool-less integration with extension cables
• Non-contact, eddy-current displacement sensing for shaft vibration and axial position
• Compatibility with 3300 XL 8 mm Proximitor sensors and extension cables

Applications

• Shaft vibration and rotor position monitoring
• Critical rotating machinery protection (turbines, compressors, pumps)
• 8 mm probe system upgrades and maintenance replacements
• Standard industrial measurement environments where specific hazardous area approvals are not required

Ordering Information

Technical Specifications

Installation Guidelines

Ensure that probe spacing is set according to the transducer system gap requirements to maintain linear output. Use caution when installing in threaded holes to prevent overtightening the probe body. Cables should be routed away from high-voltage power lines and secured to prevent vibration-induced wear. Connections must be made to the 330180 Proximitor sensor using the standard ClickLoc interface, ensuring the connector is clean and dry before mating.

Compliance and Certifications

This configuration (Option 00) does not carry specific hazardous area approvals. Users must verify local installation codes if required by facility safety standards.