Bently Nevada 330104-00-03-50-02-05 3300 XL 8 mm Proximity Probe

Description

330104-00-03-50-02-05: 3300 XL 8 mm proximity probe with 3/8-24 UNF thread, featuring 0.0 in unthreaded length (Option 00), 0.3 in case length (Option 03), 5.0 m total length (Option 50), and 05 (CSA/ATEX/IECEx) agency approvals. This non-contact, eddy-current displacement transducer is used for measuring shaft vibration and axial position within 3300 XL 8 mm monitoring chains.

The 330104 configuration utilizes the Miniature ClickLoc connector with standard cable (Option 02) for consistent electrical connection between the probe and the 3300 XL extension cable and Proximitor sensor. This specific model is intended for use in hazardous areas as defined by its CSA, ATEX, and IECEx certifications.

Features

• Option 00 (0.0 in) unthreaded length provides specific mounting flexibility for standard 3/8-24 UNF threaded installations.
• Option 03 (0.3 in) case length suited for defined depth requirements.
• Option 50 (5.0 m) total length (probe and cable) to match established system loop requirements.
• Option 02 connector type: Miniature ClickLoc, standard cable.
• Option 05 agency approval: CSA, ATEX, IECEx for hazardous area compliance.
• Eddy-current principle for non-contact measurement of relative motion and position.
• Compatible with standard 3300 XL 8 mm Proximitor sensors and extension cables.

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection
• Industrial environments requiring hazardous area certification

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe gap is set in accordance with the system manual to maintain the linear measurement range.
• Utilize provided locknuts to secure the probe position in the mounting bracket or machine casing.
• Properly route coaxial cables to prevent mechanical abrasion or excessive strain on the connector interface.
• Follow hazardous area guidelines when installing in zones defined by the Option 05 approval.

Compliance and Certifications

• CSA (Canadian Standards Association)
• ATEX (Atmospheres Explosibles)
• IECEx (International Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres)