Bently Nevada 330104-00-05-05-01-00 3300 XL 8 mm Proximity Probe

Description

330104-00-05-05-01-00: 3300 XL 8 mm proximity probe, M10 x 1 thread, armored, 0 mm unthreaded length (Option 00), 50 mm case length (Option 05), 0.5 m total length (Option 05), and Miniature ClickLoc connector with connector protector (Option 01). This eddy-current displacement transducer is engineered for non-contact vibration and position measurement within the 3300 XL 8 mm proximity transducer system.

The 330104 series features an armored cable design, providing increased mechanical protection for harsh industrial environments, while the M10 x 1 thread configuration ensures precise mounting in standard metric-threaded sensor holes. This configuration includes a connector protector to safeguard the ClickLoc connection from environmental contaminants, ensuring long-term signal integrity in critical rotating machinery applications.

Features

• M10 x 1 thread configuration for compatibility with metric mounting interfaces.
• Armored cable construction for enhanced durability and abrasion resistance in industrial settings.
• Miniature ClickLoc connector with integrated connector protector to reduce environmental interference.
• Standard cable type with 0.5 meter total system length.
• System compatibility with 3300 XL Proximitor sensors and extension cables.
• 0 mm unthreaded length and 50 mm overall case length.

Applications

• Turbine and compressor shaft radial vibration monitoring.
• Axial position (thrust) measurement.
• Critical rotating machinery protection.
• High-abrasion environments requiring cable armor.
• Metric-threaded probe mounting installations.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped according to the specific requirements of the 3300 XL system manual. When installing probes with armored cables, ensure the cable is routed away from sources of high-frequency interference and avoid sharp bends that exceed the minimum bend radius. The connector protector must be tightened by hand to ensure a proper seal against moisture and dust.

Compliance and Certifications

This unit (Option 00) does not carry specific hazardous area approvals. Users must verify installation requirements against local electrical codes if mounting in hazardous environments.