Manufacturer: Bently Nevada
Product No.: 330881-16-10-105-06-02
Country of origin:United States
Product Type: PROXPAC XL Proximity Transducer
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 250g
Dimensions: 60 mm x 110 mm x 110 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330881-16-10-105-06-02 specifies this metric PROXPAC XL proximity transducer assembly, featuring a 3300 XL 8 mm probe without approvals (Option 16), a 100 mm standoff adapter (Option 10), and a 105 mm probe penetration length (Option 105).
This integrated proximity transducer is housed in a molded thermoplastic assembly made of glass and conductive fiber-reinforced Polyphenylene Sulfide (PPS), which provides IP66 and Type 4X protection against harsh industrial environments. By incorporating the 3300 XL Proximitor sensor directly within the housing cover, this unit functions as a self-contained eddy-current measurement system that eliminates the need for separate Proximitor housings or intermediate extension cables. Field wiring connects directly to terminal blocks inside the enclosure, streamlining installation on rotating machinery.
| Option / Segment | Option Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330881-16-10-105-06-02 | PROXPAC XL Proximity Transducer Assembly (Metric) |
| A: Probe and Approvals Option | 16 | 3300 XL 8 mm probe without approvals |
| B: Standoff Adapter Option | 10 | 100 mm standoff adapter length (ordered in increments of 10 mm) |
| C: Probe Penetration Option | 105 | 105 mm probe sleeve penetration length (ordered in increments of 1 mm) |
| D: Fittings Option | 06 | One 3/4-14 NPT fitting, one 3/4-14 NPT to 1 1/2-14 NPT SST reducer, and two plugs |
| E: Mounting Thread Option | 02 | 3/4-14 NPT (required when ordering Standoff Adapter Option) |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model | 330881-16-10-105-06-02 |
| Transducer Type | Integrated eddy-current proximity probe and Proximitor sensor |
| Probe Diameter | 8 mm |
| System Compatibility | 3300 XL Proximity Transducer System |
| Input Power | Requires -17.5 Vdc to -26 Vdc without barriers at 12 mA maximum consumption (-23 Vdc to -26 Vdc with barriers) |
| Output Resistance | 50 Ohm |
| Nominal Probe DC Resistance | 7.59 Ohm +/- 0.50 Ohm (for 1.0 m probe cable) |
| Linear Range | 2.0 mm (80 mils), starting at approximately 0.25 mm (10 mils) from target (approx. -1 Vdc to -17 Vdc output) |
| Recommended Gap Setting | 1.27 mm (50 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +/- 5% including interchangeability error (measured over 80 mil range from 0 to +45 degC) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/- 0.025 mm (+/- 1 mil) at room temperature |
| Supply Sensitivity | Less than 2 mV output voltage change per volt of input change |
| Enclosure Material | Ultraviolet (UV) resistant, glass-reinforced polyphenylene sulfide (PPS) thermoplastic containing conductive fibers |
| Sleeve Material | AISI 304 stainless steel |
| Outer Sleeve and Retaining Screws | AISI 303 stainless steel |
| O-ring Material | Neoprene |
| Grounding Liner Material | AISI 304 stainless steel |
| Vibration Isolation Material | Extra soft cellular silicone |
| IP Rating | IP66 (verified by BASEEFA report T07/0709) and Type 4X |
| Impact Strength | Housing withstands 4 Joule impacts at -39 degC and +115 degC (certified by BASEEFA); 7 Joule at room temperature (CSA verified) |
| Max Load Strength | Housing supports 912 N (205 lbf) cantilever load placed 38 mm from the unsupported end |
| Retaining Nut Torque | 29.5 N-m (260 in-lb) |
| Probe Sleeve Locknut Torque | 39.3 N-m (350 in-lb) |
| Probe Operating Temp | -52 degC to +177 degC (-62 degF to +351 degF) |
| Housing Operating Temp | -52 degC to +100 degC (-62 degF to +212 degF) |
| Storage Temperature | -52 degC to +105 degC (-62 degF to +221 degF) |
| Relative Humidity | 100% condensing, non-submersible (when properly sealed) |
To establish a proper environmental seal, verify that the housing cover and all conduit connection points are fully secure. Take precautions to prevent moisture from traveling through the conduit piping into the housing. Tighten the retaining nut to the recommended torque of 29.5 N-m (260 in-lb) and the probe sleeve locknut to 39.3 N-m (350 in-lb). Maintain the recommended gap setting of 1.27 mm (50 mils) between the probe tip and the target material during setup.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Commission IO-Link systematically from master addressing and port modes through IODD selection, PLC byte mapping, parameter backups, device validation, and failure-injection tests.
A practical PowerFlex braking guide covering regenerative energy, resistor resistance and duty cycle, thermal protection, model-specific parameters, and measured commissioning tests.
An industrial joystick is only the first element in a safe motion command chain. This guide covers sensing choices, wiring, signal validation, PLC logic, restart behavior, and commissioning for...
PID tuning becomes safer when engineers can see how proportional, integral, and derivative actions reshape error, output, and response over time. This guide turns live trends into a disciplined...
A linear axis should be proven mechanically before aggressive tuning begins. This commissioning workflow covers scaling, direction, limits, homing, STO, low-speed tests, and evidence-based tuning for...
Interposing relays protect PLC and DCS interfaces by separating voltage domains, matching output capacity to field loads, and making faults easier to isolate. This guide explains selection,...
