Description

Fully threaded M10 x 1 metric probe body (Option 00) with a 50 mm case length (Option 05), a 1.0 m total length (Option 10), and integral stainless steel armor (330104) defines this specific proximity probe configuration — 330104-00-05-10-02-00. This unit includes a miniature coaxial ClickLoc connector on a standard cable (Option 02) and does not require agency approvals (Option 00).

This armored configuration provides physical defense against abrasion, crushing, and cutting forces in harsh environments, distinguishing it from standard unarmored versions like the 330103. The M10 x 1 metric thread allows direct installation in tapped machine casings, measuring dynamic shaft vibration or axial position by pairing with a 3300 XL extension cable and a 3300 XL Proximitor sensor.

Features

• Option 00 specifies a 0 mm unthreaded length, providing a fully threaded casing for maximum installation depth adjustment.
• Option 05 designates a 50 mm overall case length with M10 x 1 metric threads.
• Option 10 provides a 1.0 meter (3.3 feet) total cable length, suitable for direct routing or coupling with standard extension cables.
• Option 02 supplies a miniature coaxial ClickLoc connector without a connector protector on standard cable.
• Built-in flexible stainless steel armor covers the transducer cable to protect against mechanical damage and fluid ingress in aggressive plant environments.
• Option 00 agency approval indicates that no specialized hazardous area certificates are included with this configuration.

Applications

• Shaft vibration and axial position measurements on steam turbines, gas turbines, and compressors.
• Industrial pumps, gearboxes, and electric motors with metric casing threads.
• Severe-duty applications requiring physical cable armor to resist physical wear, abrasion, or mechanical pinching.

Ordering Information

Technical Specifications

Installation Guidelines

• Minimum clearance of 8.0 mm from surrounding metal is required to avoid side-viewing target interference.
• Mount probe securely inside a tapped machine casing or bracket with M10 x 1 threads, keeping mounting torque within standard metric thread engagement recommendations.
• Set the electrical gap to the nominal target offset (typically 1.27 mm or 50 mils) corresponding to the midpoint of the Proximitor linear output range (approx. -10 Vdc).
• Route the armored cable through clean areas, avoiding physical pinches or bends tighter than the minimum recommended bend radius.